kgandy21

updated

16 years ago

K

kgandy21

4 Posts

0

4725

December 8th, 2010 17:00

How do you enable Navisphere Analyzer on a CX-300?

How do you enable Navisphere Analyzer on a CX-300? It is currently greyed out.

KG..

  • Bor4s

    10 Posts

    838

    0

    Posted December 9th, 2010 06:00

    It is very strange in your software list you have 2 "-NavisphereAnalyzer entries" - one says active and another - not active. Also I do not see Analyzer Provider and Analyzer UI on the list. My guess (in your case) the enabler for analyzer is not installed. If you are registered on Powerlnk and you purchased analyzer then you can download Analyzer enabler from Powerlink.

    https://powerlink.emc.com

    Starting from Flare Release 24, Navisphere Analyzer is always installed in a basic configuration. This is to allow service to determine performance problems without needing to install Analyzer or the Transient Enabler. If the array does not have the licensed Analyzer installed, the archive files will be encrypted (.NAZ). When Analyzer is enabled (licensed), the archive files will be unencrypted (.NAR).

    The standard .004 enabler is used if the customer has purchased analyzer and it will then produce .NAR files that the customer can read.

    NavisphereAnalyzer_01.01.5.004.ena is the R24 Analyzer Enabler. It is rebootless on install and uninstall and works with all R14-R28 systems.

    When enabler is install then -

    1. enable "Statistics Logging”

    untitled 1.bmp

    2. "START" the data logger from Tools/Analyzer/Data Logging.

    untitled 2.bmp

    If you cannot install enabler for whatever reason then you will see information grayed out in Data Logging screen. But you still can manipulate the analyzer by CLI. The only drawback you are not going to get .NAR files but encrypted .NAZ files which you will have to forward to your service provider (EMC) for review.

    untitled 3.bmp

    Here is the example on how to use CLI with analyzer -

    1. Check if statistics logging is enabled, if not – enable it.

    naviseccli setstats  (observe output)

    First display what it is configured for

    naviseccli setstats –on (run this if stats logging is off or disabled

    C:\>naviseccli -h 10.5.22.193 analyzer -get -narinterval -rtinterval -periodicarchiving -logperiod

    Archive Poll Interval (sec):  120

    Real Time Poll Interval (sec):  60

    Periodic Archiving:  Yes

    Current Logging Period (day):  7

    2.If you want to change any parameters here is the command -

    C:\>naviseccli -h 10.5.22.193 analyzer –set -narinterval seconds  -rtinterval seconds -periodicarchiving 0|1(off|on) –logperiod days

    C:\>naviseccli -h 10.5.22.193 analyzer

    3. If you need to change only one of the parametrs it can be done too -

    C:\>naviseccli -h 10.5.22.193 analyzer –set -periodicarchiving 1

    4. You can set all to default volues just remember that Logging Period will be "NONSTOP"

    C:\>naviseccli -h 10.5.22.193 analyzer -set –default

    C:\>naviseccli -h 10.5.22.193 analyzer -get -narinterval -rtinterval -periodicarchiving -logperiod

    Archive Poll Interval (sec):  120

    Real Time Poll Interval (sec):  60

    Periodic Archiving:  No

    Current Logging Period (day):  nonstop

    5. You can change Logging Period to whatever you need, let’s say 7 days only -

    C:\>naviseccli -h 10.5.22.193 analyzer -set -logperiod 7

    6. To stop \ start analyzer

    C:\>naviseccli -h 10.5.22.193 analyzer -stop

    C:\>naviseccli -h 10.5.22.193 analyzer -status

    Stopped on 02/27/2009 15:40:05

    C:\>naviseccli -h 10.5.22.193 analyzer -start

    C:\>naviseccli -h 10.5.22.193 analyzer -status

    Running started on 02/27/2009 16:00:05

  • kenn2347

    4 Apprentice

    •

    542 Posts

    836

    1

    Posted December 8th, 2010 18:00

    It is most likely greyed out becuase you have not purchased it and do not have the enabler loaded.  you can right click on the array and select properties.  then go to the software tab and if it say Navisphere Analyzer in that list, it is enabled.

  • Letbetterp

    2 Intern

    •

    196 Posts

    837

    1

    Posted December 9th, 2010 04:00

    FLARE-Operating-Environment 02.26.500.5.031 Active
    -AccessLogix - Active
    -NavisphereAnalyzer - Active
    -NavisphereManager - Active
    -NavisphereAnalyzer - Not Active
    AccessLogixOption 01.01.5.001 Not Active

    Does this show that is it activated on the array? If so why is the first field blank? Can I get the software?

    Thanks for letting me jump in.

  • Letbetterp

    2 Intern

    •

    196 Posts

    837

    0

    Posted December 9th, 2010 07:00

    Bor4s,

    I posted a new thread to give you credit for this.

  • Letbetterp

    2 Intern

    •

    196 Posts

    837

    0

    Posted December 9th, 2010 08:00

    Dec 9, 2010

    Re: How do you enable Navisphere Analyzer on a CX-300?

    my guess is he opened a new thread in the hopes taht you would reply in it.  then he could award you points for the correct answer since he is the thread owner.

    kenn2347 is correct, and I didn't explan myself very well. just trying to do 4 things at a time.
    Multi tasking is not working well today.
  • kenn2347

    4 Apprentice

    •

    542 Posts

    837

    0

    Posted December 9th, 2010 08:00

    my guess is he opened a new thread in the hopes taht you would reply in it.  then he could award you points for the correct answer since he is the thread owner.

    Very detailed answer also:)  it should be put into a  document

  • Bor4s

    10 Posts

    837

    0

    Posted December 9th, 2010 08:00

    How is it gives me a credit if in your new post I see my name is not mentioned at all?

  • Bor4s

    10 Posts

    837

    0

    Posted December 9th, 2010 08:00

    Sorry for the confusion. That is what is happening if not using this forum for some time.

    And kenn2347 is correct if your clariion is already generating the .NAR files then you do not need anything ellse.

  • Bor4s

    10 Posts

    111

    0

    Posted December 9th, 2010 10:00

    Already done – it is waiting on approval

  • Letbetterp

    2 Intern

    •

    196 Posts

    837

    0

    Posted December 9th, 2010 10:00

    Thanks for the help Bor4s and Kenn2347.