
Solved!
Go to SolutionXPS 8960, System Configuration Revisited - Take 2
I purchased a Samsung 990 Pro 4tb with HeatSink and installed same without any problems.
The drive was initialised in Windows DiskManagement and a quick format was performed and named as Drive D.
However, in Windows Management it now shows up as "NTFS (Bitlocker Encrypted)".
In Command Prompt in Conversion Status it shows "Used Space Only Encrypted".
If I then open Control Panel the drive is now showing "Bitlocker waiting for activation".
My C-drive is also shown up as "Bitlocker waiting for activation".
But my F-drive (mechanical Western Digital hard drive) shows "Bitlocker Off".
And Bitlocker is not mentioned at all in Diskmanagement for Drive F.
I have always been confused as to how Bitlocker actually works.
But is there a way I can have Bitlocker in Control Panel to show Off ?
I have tried to format the SSD drive a couple of times, but Bitlocker still shows up.
In my Microsoft Account, there is no sign of a recovery key for the SSD drive.
By the way, I have about 10 months ago changed SATA/NVMe Operation Mode to AHCI/NVMe.
Thank you for taking the time to reply.
(edited)
Responses (2)
Solutions (0)

ispalten
7 Practitioner
•
2650 Posts
•
9771 Points
6
0
Posted November 15th, 2026 13:25
Check this link, https://www.dell.com/community/en/conversations/xps-desktops/xps-8960-disk-partition-not-found/67cd2142ec5c334f5efa2317 as it seems to be the same problem solved.