BBowman

updated

13 years ago

B

BBowman

22 Posts

0

18436

September 10th, 2013 10:00

PERC 5i question: can I create two RAID 10 volumes?

I have PE2900 that is running as our email server.  It is currently configured with 4 160gb SATA drives as a single RAID 10 virtual disk.  I'm running out of free disk space so I was wondering if the PERC 5i would allow me to create another virtual disk simliar to the existing one if I added 4 more similar disks?  Is this possible?

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    764

    0

    Posted September 10th, 2013 10:00

    Yes the PERC5/i will allow you to create a 2nd RAID 10, you could also create a RAID 5 or a different RAID level if you wanted. http://support.dell.com/support/systemsinfo/document.aspx?s=slg&~file=/storage/raid/perc5/en/ug/html/chapterb.htm#wp1056871

  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    764

    0

    Posted September 10th, 2013 11:00

    That is correct. The drive will just show unallocated space until you create the partition.

  • BBowman

    22 Posts

    764

    0

    Posted September 10th, 2013 11:00

    thank you, this will hopefully make my life easier :).  After I create the second RAID 10 volume, I'll just need to create the new partition within Disk Management, right?

  • BBowman

    22 Posts

    764

    0

    Posted November 6th, 2013 18:00

    Hello, finally got the drives and configured the new Virtual Disk with RAID 10.  Only problem is it wouldn't allow me to initialize the new VD.  When I tried Fast Initialization or regular it showed an immediate error: ERROR! Fast Init. operation failed!

    I restarted the server and I see new unallocated space in disk management.  Would it be ok to start using this new space or am I asking for trouble because the new VD wasn't initialized?  This VD will be used to house a new MS Exchange 2007 storage group.

    thanks in advance,

    Ben

  • BBowman

    22 Posts

    764

    0

    Posted November 18th, 2013 17:00

    For future reference, the new volume would not initialize because one of the new drives ended up being bad.  Swapped in a new drive and fast initialization worked like a charm.