PERC 5i question: can I create two RAID 10 volumes?
I have PE2900 that is running as our email server. It is currently configured with 4 160gb SATA drives as a single RAID 10 virtual disk. I'm running out of free disk space so I was wondering if the PERC 5i would allow me to create another virtual disk simliar to the existing one if I added 4 more similar disks? Is this possible?
thank you, this will hopefully make my life easier :). After I create the second RAID 10 volume, I'll just need to create the new partition within Disk Management, right?
Hello, finally got the drives and configured the new Virtual Disk with RAID 10. Only problem is it wouldn't allow me to initialize the new VD. When I tried Fast Initialization or regular it showed an immediate error: ERROR! Fast Init. operation failed!
I restarted the server and I see new unallocated space in disk management. Would it be ok to start using this new space or am I asking for trouble because the new VD wasn't initialized? This VD will be used to house a new MS Exchange 2007 storage group.
For future reference, the new volume would not initialize because one of the new drives ended up being bad. Swapped in a new drive and fast initialization worked like a charm.
DELL-Josh Cr
Community Manager
•
9801 Posts
•
45350 Points
764
0
Posted September 10th, 2013 10:00
Yes the PERC5/i will allow you to create a 2nd RAID 10, you could also create a RAID 5 or a different RAID level if you wanted. http://support.dell.com/support/systemsinfo/document.aspx?s=slg&~file=/storage/raid/perc5/en/ug/html/chapterb.htm#wp1056871