AAlbarody

updated

4 years ago

A

AAlbarody

1 Rookie

•

11 Posts

0

2214

August 30th, 2022 16:00

Adding Samsung 980 Pro NVME GEN4 to Optiplex 5090 MT

I have a Dell Optiplex 5090 MT desktop, I want to install a 512GB Samsung 980 Pro NVME GEN4

when tested with CrystalDiskInfo, I found it working at PCIe GEN3 Mode while the PCIe GEN4 Mode is supported!

how can I enable the PCIe GEN4 mode from the machine to gain the maximum speed of this disk as now im working at half disk speed!

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    817

    1

    Posted September 1st, 2022 22:00

    It is possible that Dell 5090 oem Q570 chipset has 1x16 PCIe gen 4 lanes of cpu all wired to PCIe 4.0 x 16 graphics slot, and onboard M.2 slot connected to 4 PCIe 3.0 of chipset.  Dell only validated PCIe gen 3 nvme ssd in this model which may speak for that.  We have seen in the past Dell oem board m.2 is often curtailed to lower end spec (such as XPS 8900 M.2 was only x1).  If this is the case for 5090, you can try use a pcie4.0 nvme adapter to install the ssd in the x16 slot, if you do not currently have a dedicated graphics card in it already.

  • sam55todd

    2 Intern

    •

    243 Posts

    859

    0

    Posted August 30th, 2022 17:00

    It's really depends on how Dell (or their MB subcontractor) have implemented the M.2 slot, 5090 are cheap version with only one M.2 for storage (vs 7090 Tower - which has 2) therefore a lot of high-end features are not available.

    If it's hooked into CPU PCIe bus - then it can go up to Gen4 (depending on CPU as described below), if it's wired to chipset (Q570) then it's Gen3 as maximum (per Intel' specification)

    Also depends on your CPU PCIe lanes, Gen 11 supports Gen4 PCIe, Gen 10 CPUs don't (if I remember correctly)

  • AAlbarody

    1 Rookie

    •

    11 Posts

    826

    0

    Posted September 1st, 2022 17:00

    Thank you Kudos for your reply, my disk is hooked directly into MB-CPU NVME PCIe bus, its I5 Gen 11, so it should be PCIe Gen 4, its built on the main board, CrystalDiskInfo show that current mode is PCIe 3.0 x4 and the supportd mode is PCIe 4.0 x4, so how can i enable the transfer mode to be PCIe 4.0 x4, do i need BIOS update? special settings, driver, ...etc ?? really dont know why it cant be boosted to be PCIe 4.0 x4!

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    825

    0

    Posted September 1st, 2022 18:00

    If your cpu and chipset even support it, the 1st on-motherboard M.2-NVMe slot is usually PCIe-4.0 x4 lanes (aka 4x4). You use this for your C-Drive.

    However, the 2nd on-motherboard slot (and others) are often just PCIe-3.0 x4 lanes ... but that is still really fast ... like 3500=r/w=3000 .

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • AAlbarody

    1 Rookie

    •

    11 Posts

    825

    0

    Posted September 1st, 2022 18:00

  • computer monster

    1 Rookie

    •

    45 Posts

    755

    0

    Posted September 2nd, 2022 04:00

    check if your motherboard supports pci e gen4

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    809

    0

    Posted September 2nd, 2022 11:00

    Adding to what reddps630 with screengrabs.  Could be a little confusion as an m.2 2280 gen4 drive is listed, but slots are gen3.  ?  Probably would have to take MB as all Gen3.

    Screenshot_20220902-131845.png

    Screenshot_20220902-131929.png

     

  • AAlbarody

    1 Rookie

    •

    11 Posts

    566

    0

    Posted September 2nd, 2022 15:00

    at the manual , the port beyween ram and processor is pcie gen4, although it reads/shows gen3 !

  • AAlbarody

    1 Rookie

    •

    11 Posts

    774

    0

    Posted September 2nd, 2022 15:00

    it is PCIs-4.0 x4 as stated at the " Setup and spasification PDF Page 19 

    "M.2 2280 solid-state drive PCIe NVMe Gen4 x4, Class 40 Up to 2 TB"

    the port near to the processor and the rams

  • AAlbarody

    1 Rookie

    •

    11 Posts

    621

    0

    Posted September 2nd, 2022 15:00

    so i must consult the vendor !