Since the Dell bios isn't really "gaming-oriented," it will be practically impossible to change the speed. I would try to return the new ram and just get two more sticks of what you already have. (32gbs is a little overkill for most things lol).
A lot of them have an spd of 2133 or 2400, so it will run like that in the Inspiron 5680. There is no way to change the XMP in the bios. However, this ram works at 2666 Mhz (I have it installed).
The speed at which the RAM will run is determined by the processor you have, as the memory controller is onboard the CPU. Check the specifications for your processor and you'll likely find the RAM is set for 2400. Even if the memory is capable of more, it won't run faster without a CPU that correspondingly supports faster RAM - or a board that supports overclocking the memory (which yours does not).
I understand that its based upon the CPU support but this CPU and Motherboard both support 2666 up to 64gigs. Instead of downclocking to 2666 it downclocked to 2400.
I'm just wondering if thats normal and to be expected? I've reset the cmos and every thing the sticks work, reported as 32gigs but they only run at 2400.
T-force Vulcan Z ddr4 3200, Specifically four eight gigabyte sticks for 32 gigs. My hyperX DDR4 2666 runs at the rated speed but I was able to get 32 gigs so cheap I jumped at the chance and assumed they would downclock to 2666 but instead they downclocked to 2400.
Note: according to Cpu Z the chips are samsung manufactured.
"I'm just wondering if that's normal and to be expected?"
Two unknowns here... * We never tested/validated 3200MHz memory in the Inspiron 5680 * We never tested/validated a 4 x 8GB configuration in the Inspiron 5680
Our BIOS was only tested/validated with our OEM 2400MHz and 2666MHz memory sticks.
I knew from the outset it wouldn't run at the 3200 but I assumed that given the cpu and mobo both support a max of 2666 out of the box it would downclock to that but after doing more research it seems this dell mobo and an i3 are default 2400 the 2666 is actually an overclock according to the jedec spd since it doesn't support Intel xmp.
I read it somewhere on here now I can't seem to find the thread.
Just go to BIOS, click Restore Settings, choose Factory Default. After do this, i hope your computer will run at least with speed 2666Mhz. Looking forward to your feedback.
inspiron5680psu
10 Posts
5792
1
Posted May 19th, 2020 09:00
Since the Dell bios isn't really "gaming-oriented," it will be practically impossible to change the speed. I would try to return the new ram and just get two more sticks of what you already have. (32gbs is a little overkill for most things lol).