WRLB

updated

7 years ago

W

WRLB

1 Rookie

•

6 Posts

0

6867

May 18th, 2020 14:00

Inspiron 5680, 3200MHz ram running at 2400MHz

I recently upgraded from 16 gigs "4x4" 2666 ram to 32GB "4x8" 3200 ram. I never expected it to run at 3200 but its running at 2400 instead of 2666.

Any idea?

I know the system supports up to 64GB 2666.

  • 5792

    1

    Posted May 19th, 2020 09:00

    Since the Dell bios isn't really "gaming-oriented," it will be practically impossible to change the speed.  I would try to return the new ram and just get two more sticks of what you already have.  (32gbs is a little overkill for most things lol).

  • 5814

    1

    Posted May 19th, 2020 05:00

    Which memory manufacturer and model did you use?

    A lot of them have an spd of 2133 or 2400, so it will run like that in the Inspiron 5680.  There is no way to change the XMP in the bios.  However, this ram works at 2666 Mhz (I have it installed).

    https://www.amazon.com/Crucial-Single-PC4-21300-288-Pin-Memory/dp/B019FRDTY2?th=1

  • ejn63

    12 Elder

    •

    31856 Posts

    •

    156298 Points

    5818

    0

    Posted May 19th, 2020 05:00

    The speed at which the RAM will run is determined by the processor you have, as the memory controller is onboard the CPU.  Check the specifications for your processor and you'll likely find the RAM is set for 2400.  Even if the memory is capable of more, it won't run faster without a CPU that correspondingly supports faster RAM - or a board that supports overclocking the memory (which yours does not).

     

  • WRLB

    1 Rookie

    •

    6 Posts

    5810

    0

    Posted May 19th, 2020 07:00

    I understand that its based upon the CPU support but this CPU and Motherboard both support 2666 up to 64gigs. Instead of downclocking to 2666 it downclocked to 2400.

    I'm just wondering if thats normal and to be expected? I've reset the cmos and every thing the sticks work, reported as 32gigs but they only run at 2400.

     

  • WRLB

    1 Rookie

    •

    6 Posts

    5811

    0

    Posted May 19th, 2020 07:00

    T-force Vulcan Z ddr4 3200, Specifically four eight gigabyte sticks for 32 gigs.
    My hyperX DDR4 2666 runs at the rated speed but I was able to get 32 gigs so cheap I jumped at the chance and assumed they would downclock to 2666 but instead they downclocked to 2400.

    Note: according to Cpu Z the chips are samsung manufactured.

     

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    5791

    0

    Posted May 19th, 2020 09:00

    "I'm just wondering if that's normal and to be expected?"

     

    Two unknowns here...
    * We never tested/validated 3200MHz memory in the Inspiron 5680
    * We never tested/validated a 4 x 8GB configuration in the Inspiron 5680




    Image

     

    Our BIOS was only tested/validated with our OEM 2400MHz and 2666MHz memory sticks.


    TP9W1 16GB,2666MHz,2RX8,DDR4,1Gx72,8K,288pin,2Rx8,Dual Rank,Unbuffered,1.2v,Non-ECC
    Hynix HMA82GU6CJR8N-VK
    Micron MTA16ATF2G64AZ-2G6E1, MTA16ATF2G64AZ-2G6H1
    Samsung M378A2K43CB1-CTD
     
    Y7N41 8GB,2666MHz,1RX8,DDR4,1Gx64,8K,288pin,1Rx8,Single Rank,Unbuffered,1.2v,Non-ECC
    Hynix HMA81GU6CJR8N-VK
    Micron MTA8ATF1G64AZ-2G6E1, MTA8ATF1G64AZ-2G6H1
    Samsung M378A1K43CB2-CTD








    M0VW4 8GB,2400MHz,1RX8,DDR4,1Gx64,8K,288pin,1GBx8,Single Rank,Unbuffered,1.2v,Non-ECC
    Hynix HMA81GU6AFR8N-UH, HMA81GU6AFR8N-UH, HMA81GU6CJR8N-UH, HMA81GU6MFR8N-UH 
    Kingston KM0VW4-MIB, KM0VW4-MIB, KM0VW4-MID, KM0VW4-MIH 
    Micron MTA8ATF1G64AZ-2G3B1, MTA8ATF1G64AZ-2G3B1, MTA8ATF1G64AZ-2G3E1, MTA8ATF1G64AZ-2G3H1 
    Samsung M378A1K43BB2-CRC, M378A1K43BB2-CRC, M378A1K43CB2-CRC





    DELL-Chris M (old account)

    #IWork4Dell

  • WRLB

    1 Rookie

    •

    6 Posts

    5777

    0

    Posted May 19th, 2020 14:00

    I knew from the outset it wouldn't run at the 3200 but I assumed that given the cpu and mobo both support a max of 2666 out of the box it would downclock to that but after doing more research it seems this dell mobo and an i3 are default 2400 the 2666 is actually an overclock according to the jedec spd since it doesn't support Intel xmp.

    I read it somewhere on here now I can't seem to find the thread.

     

    But oh well thanks

  • tailevn

    23 Posts

    5352

    0

    Posted July 18th, 2020 19:00

    Just go to BIOS, click Restore Settings, choose Factory Default. After do this, i hope your computer will run at least with speed 2666Mhz. Looking forward to your feedback.