sergipppp

updated

2 years ago

S

sergipppp

1 Rookie

•

19 Posts

0

10602

April 8th, 2021 04:00

Alert CDEV6131 Unable to perform the operation on the device because connection with the device is lost.(OME 3.5.0)

Hi all !

We do not stop receiving the following critical error message with many devices :

Alert CDEV6131 Unable to perform the operation on the device because connection with the device is lost.

We can check that the communication with the devices is correct.

Any solution/suggestion.

THANKS

OME_CDEV6131.JPG

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    0

    0

    Posted April 9th, 2025 20:29

    Cityofannapolis,
     

    By default, the value of WS-MAN Service Check Timeout is set to 1 second with a hard-coded number of retries. What is recommended is to increase the timeout value higher than the default to avoid these connection failures.

     

    Let me know if this helps.

     

     

     

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    4557

    0

    Posted April 8th, 2021 09:00

    Hello,

     

    What troubleshooting steps have you taken so far? I'd verify that the host is up and that the iDRAC is responsive. This can be done through CLI by issuing a simple command like 'racamd getsysinfo.' I'd also restart the appliance, if you haven't already. My understanding is that you've verified the network configuration, so these steps may help, if the issue isn't config related.

  • Jaynatic

    3 Posts

    3677

    0

    Posted December 14th, 2021 23:00

    Hello,

    I have the same problem. Many servers generate "CDEV6131, Unable to perform the operation on the device because connection with the device is lost" at regular intervals, producing a lot of mails. We have updated from version 3.4.1 (Build 24) to 3.8.1 (Build 16). We didn't have the problem before. 
    Is there a solution for this? I have rebooted all of our three appliances so far.

  • sergipppp

    1 Rookie

    •

    19 Posts

    3669

    0

    Posted December 15th, 2021 00:00

    In their day, after several conversations and open threads with support, they told us the following alternatives:

    1. Install hotfix 3.5.1 (which removes or reduces the false alert)
    2. Wait for the release 3.6 that comes out in the middle of May.
    3. Or ignore these alerts, creating an alert policy


    but I see that you are already in a higher version ...

  • DELL-Erman O

    Moderator

    •

    2984 Posts

    •

    14874 Points

    3663

    1

    Posted December 15th, 2021 01:00

    Hello,

    You can try to reset iDRAC and make sure iDRACs firmware have up to date. To help decrease CDEV6131 events, one can: Retries and timeouts configured under device Discovery configuration in Additional Settings. have it change retries from 3 to 4. 

    *Apart from that I could reach the information whilst reviewing the issue is that these repeated occasions will be addressed in the 3.9 release with an ETA of 1st Quarter of 2022. 

     

    Hope that helps!

    DELL-Erman O

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    3616

    0

    Posted December 21st, 2021 12:00

    I can share your feedback and see if the relevant team can replicate the behavior, but I would recommend testing 3.9. As Erman had mentioned, it should be available early 2022.

  • 3618

    0

    Posted December 21st, 2021 12:00

    Hi Erman,

    In our environment we're having the same issues. And they are basically all related to IOMs (in our case MX9116n's, MX7116n's and MXG610's). Nothing in our case is related to iDRAC. Also we tend to see stuff "disappear". If I run a CMC discovery of our MX7000 chassis groups I end up with 90 devices and this tends to drop during the day to about 77/78 and we're not removing anything. 

    We currently run the latest 3.8.2.8 build.

  • 3487

    0

    Posted January 5th, 2022 04:00

    If you could share any feedback you get from the team that would be great!

    Feel free to send me a private message if the team wants/needs to see our environment or wants to do a remote session.

  • TaylorTech

    1 Message

    3282

    0

    Posted February 1st, 2022 06:00

    We are having the same issue.  Is it possible to ignore a specific Message ID?  From what I can see if we turn off the Devices then we won't get messages if other errors come up?

  • DELL-Marco B

    Moderator

    •

    3980 Posts

    3279

    0

    Posted February 1st, 2022 09:00

    Hello,

    what do you mean with turn off the devices? If there is a idrac, even with the server off you can receive this error.

    Did you updated OME?

    Thanks

    Marco

    DELL- Marco B

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!