XPS 9560 IRST update causing "Boot Twice" conflict with SK Hynix PC300 SSD!!!
To all Community members and Dell representatives.
Has Dell found a solution for the incompatible BIOS, and or IRST update effecting the SK Hynix PC300???
Many people are reporting that updating the IRST and or BIOS is causing the need for a forced shutdown during the first boot attempt then a second attempt to load the OS!!!
Meaning on the first boot attempt the system just hangs at the Dell logo.
They need to hold the power button down to turn the system off.
Then power-on again to then load the OS.
I have found that the updates seem to be only effecting the SK Hynix PC300.
I have the same problem discribed above where the computor freezes at the Dell screen and requires a powerdown and then reboot to start the computor. This problem occured after Dell did an update to the BIOs of my XPS 15 9560. My SSD is a PC300 NVMe SK hy. Dell please provide a solution to the problem created to my BIOs by your update. Thanks to all that have contributed to finding a solution to this problem
Checked my XPS 15 9560 device manager and the drive for my computer lists SSD NVMe PC300 NVMe SK hy and says the device is working properly. As I stated in my post to Dell XPS 15 (9560) freezes at Dell logo on start-up, my computer just started this problem recently and I have been powering off then on again to get it to boot Windows 10. Since I did a system restore to 8/29/2019, it has been booting to Windows on first power up. I am not good navigating computer systems, and I haven't a clue as to what is going on, but hope Dell is working on a fix to the problem. Thanks to all the tech people out there sharing! good on ya
I am having the same problem as everyone else. Freezing at Dell logo after startup. I am really frustrated that this is happening right after my warranty runs out. I paid a lot of money for what I thought was a good pc. If this isn't fixed there is no way I will be buying any Dell products in the future, and I'll be doing my best to recommend others done either. Very annoyed.
I spoke with a Dell Support Team yesterday and they are aware of the IRST fix however, they had me do something else that fixed the problem. Obviously ,you can downgrade the IRST driver as this appears to fix. However, here is what Dell did that worked for me. In Power Settings -> Advanced Settings set Hard Disk > Turn off Hard disk = 0 (never) for both battery and plugged in. Result = in morning, open lid, laptop wakes, logged in.
For what it is worth the IRST BIOS update triggered this for the xps 9560 series but, Dell is claiming this issue has been around for other systems since the Win 10 1903 update. They said that after next window update to check the Hard disk settings and set back if needed. However, I'm not seeing any performance or issue with HD set to 0 so far.
Just read the post about the new IRST driver version 17.5.0.1017 causing conflict with the SK Hynix PC300 and the suggestion to roll back to the 15.7.5.1025, A03 version. I checked my device manager, storage controller to see what driver was installed and I see my computer has Intel version 15.7.5.1025 dated 8/10/2017 listed. I see in my update history that Windows 10 version 1903 was installed 8/9/2019. After reading one post saying Dell is aware of the booting issue also on other systems beside XPS 9560 since the Windows update, and I have the older IRST version, that there is an added issue involved. If a Windows update fix or a Dell solution, it can't come soon enough. This all to me is like an Alien 51 takeover!....good on ya again for all the help
PhyllisMFC
2 Posts
7248
0
Posted September 29th, 2019 03:00
Thank you! I rolled back the IRST to the previous version and boom it works! Thank you again