Mike-R2

updated

6 years ago

MR

Mike-R2

1 Rookie

•

5 Posts

0

1320

July 30th, 2020 12:00

Obtaining firmware info with RACADM

Hello all,

Can someone advise on whether there is a way to obtain only DRAC FW info using RACADM or perhaps PowerShell? 

 

Using the RACADM RACDUMP command provides more info than is really required that I'm trying to collect and import into a database.

 

Thanks.

 

 

  • DiegoLopez

    6 Operator

    •

    2668 Posts

    960

    0

    Posted July 31st, 2020 02:00

    Hello @Mike-R2,

     

    You can try: 

    racadm getversion -f idrac


    Source


    Let me know if you need any more help.

    Regards

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    910

    0

    Posted August 3rd, 2020 09:00

    Hi Mike,

     

    Speaking generally, a lot of certificate issues are resolved with an update to the iDRAC. I would begin by bringing the iDRAC up to date (if it isn't already). The times that that this didn't resolve it were times involving custom certificates. You hadn't mentioned a custom cert in your post, so I'd think the iDRAC update would probably be a good call.

  • Mike-R2

    1 Rookie

    •

    5 Posts

    914

    0

    Posted August 3rd, 2020 09:00

    Thank you, this is what I needed.

    One more question, is there some way to stop the 'Security Alert: Certificate is invalid' message from appearing?

    I've tried the --nocertwarn switch but that doesn't seem to work. 

  • Mike-R2

    1 Rookie

    •

    5 Posts

    904

    0

    Posted August 3rd, 2020 10:00

    OK, thanks Dylan. Let me compile our list and see if this addresses it.