My Inspiron 7559 is not detecting Samsung 960 Evo M.2. I have updated the BIOS and also intel drivers and Dell drivers. I have also tried to disable SATA (as I read this might help) however in BIOS 'SATA Operation' only has two options: AHCI and ATA -- I have it set to AHCI. I have also disabled 'secure boot' as have read this might assist. I have tried the Samsung_NVM Express Driver and not surprisingly it does not detect the drive. Finally I have checked that the Evo is inserted correctly and it is. I have attached a doc with speccy info if that helps. Any advice would be appreciated. Martin
Make sure your system is on the latest BIOS - and that AHCI is enabled (the system likely shipped with RAID enabled). You'll also need to load the Samsung NVMe drivers when you install Windows 10 onto the drive.
I have Dell inspiron 7560 core i7/8GB/128gb SSD/1TBHDD i need to upgrade exiting 128 gb Hynix SSD to samsung 960 EVO but no luck it is not detecting the SSD can somebody help on this matter presently i have the latest BIOS 1.1.6.
The 960 EVO is an NVMe drive. Your system supports only SATA drives - you'll need to return the 960 EVO and get the SATA version (from Samsung that's the 850)
Dell-SreejithR
6 Operator
•
3398 Posts
52445
2
Posted March 23rd, 2017 06:00
Thank you for your message.
Inspiron 7559 has a Sata III interface & will work with Samsung 850.
Samsung 950 uses PCIe NVMe interface which is not compatible with this model.