bhamill

updated

10 years ago

B

bhamill

36 Posts

0

2570

August 22nd, 2016 12:00

Move RAID5 array to different server

Had a RAID failure on an old PE2850 ; looked like two disks failing at once, which makes me suspect the PERC, not the disks - especially because I moved the disks as a unit to another PE2850 and was able to mount it as a second RAID array (OS of new server on RAID1 disks 0 and 1, this array disks 2-5) and it recognized the array. 

However, I can't mount it as an Windows partition.  I boot the OS on the new server and disk manager recognizes there is a disk there, but I can't use it unless I format it, which will defeat the purpose of the whole activity, which at this point is to somehow pull useful data off the array. 

Can anybody suggest a way to get that array recognized by a new server or PERC card or something?

  • theflash1932

    11 Legend

    •

    16255 Posts

    2026

    0

    Posted August 22nd, 2016 19:00

    You would only be able to hook it up to a PERC 4 controller, otherwise it won't recognize the VD.

    You might try mounting in linux ... sometimes that has a better (or at least different) tolerance for corrupt partitions/file systems. If the file system/partition table is damaged, then you can also try tools to attempt to repair it. If the damage is superficial, then they often work.

    You said you had two disks fail ... describe how you got the array back online. It matters and may determine whether further attempts to recover data are futile or not.

  • bhamill

    36 Posts

    2026

    0

    Posted August 22nd, 2016 12:00

    Oh, and to answer the obvious question - no, I don't have a good backup.  Boss will take that out of my hide later, in the meantime we're just trying to get info.

  • bhamill

    36 Posts

    2026

    0

    Posted August 23rd, 2016 08:00

    Thanks for the reply.   I did eventually mount it on the same model PERC - it recognized a partition, and then windows could see a partition, but info was garbled beyond usefulness.  Then the boss stepped in and said stop wasting time, go to the departments in question and tell them you'll help them any way possible to get the site replaced.  So, I'm moving on from the recovery phase to the mea culpa phase....

  • theflash1932

    11 Legend

    •

    16255 Posts

    2026

    0

    Posted August 23rd, 2016 09:00

    Not saying it is the cause of the corruption, but recovering from a multi-drive failure can be tricky, but there are ways that preserve as much data as possible and other ways that guarantee mild to severe data loss. Good luck!