TheCatnTheHat

updated

6 years ago

0

60857

July 11th, 2014 20:00

KVM 2161AD

I have 4 2161AD KVM with RAK enabled.  We needed more SIPs and the so we ordered from a vendor who ordered from Dell.  We got a box full of avocent mpuiq-vmchs ....... here's the rub... when I connect that to a server and plug in the Cat 5 line it doesn't show up on the KVM... little help here?

Cordially,

Mark D. Henry

Technical Marketing Manager, SanDisk Inc.

  • 2200

    0

    Posted September 1st, 2014 03:00

    Good morning,

    I should have posted this...my bad... these guy's won't help you because they don't know the solution... Go to dellkvm.com and download the latest firmware for the 2161AD... after that you will be able to see these dongles and upgrade firmware on all dongles and make them all work together without any issues.

     

    Direct link: https://dell.app.box.com/s/7sqybqrde1dtjtzqpop1

     

    Cordially,

    Mark D. Henry

    Technical Marketing Manager, Enterprise Storage Solutions
    SanDisk

  • Daniel My

    12 Elder

    •

    6205 Posts

    2201

    0

    Posted July 12th, 2014 11:00

    Hello Mark

    Can you provide the part number for the SIP? We sell Dell KVMs and Avocent KVMs. If these are Avocent SIPs then they will not likely work on our version of the Avocent switches.

    Thanks

  • 2200

    0

    Posted July 14th, 2014 10:00

    DELL 430-4346

  • 2200

    0

    Posted July 15th, 2014 12:00

    Actually I stand corrected... it seems someone changed the part number... what we got was 430-4343.

  • 2200

    0

    Posted July 16th, 2014 11:00

    We are not using PEM configuration.  The SIPs are connected directly to the KVM.  I will attempt connecting only these new SIPs and see what we get.  Thanks.

  • Daniel My

    12 Elder

    •

    6205 Posts

    2200

    0

    Posted July 16th, 2014 11:00

    Those SIPs should work fine. Is there anything else about the configuration you can tell me? Are you using port expansion module or any other non-standard configuration? The SIP you purchased will not likely work with a PEM: http://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/dell-kvm-1081-2161-ad_User%27s%20Guide2_en-us.pdf Page 33 discusses the limitations of PEMs.

    If you are not using PEMs then I would suggest disconnecting all of your old SIPs and only connect these to the switch. If they are detected then run any updates on them that you can and test again with all SIPs populated.

    Thanks

  • 2200

    0

    Posted July 16th, 2014 12:00

    Ok I tried that.  That did not work either.  Dell is suggesting now that we replace with DELL A7547276 ... so I guess we'll go that route.  You'd think it wouldn't be so tough for someone to look up the DELL KVM 2161AD and say, "You need these USB KBM SIMs."

  • Daniel My

    12 Elder

    •

    6205 Posts

    2200

    0

    Posted July 27th, 2014 13:00

    You'd think it wouldn't be so tough for someone to look up the DELL KVM 2161AD and say, "You need these USB KBM SIMs."

    We do have compatibility lists, and I show the ones you received are compatible. There may have been a manufacturing issue with them or some other issue. Let me know if the new ones work.

    Thanks

  • pwascheul

    1 Message

    2200

    0

    Posted September 1st, 2014 03:00

    Hi 

    im facing some issue with 2161AD KVM. i 've been provided with MPUIQ-VMCHS modules from my account manager but still unable to get my servers connected to the KVM

    KVM Svce Tag :<ADMIN NOTE: Service tag removed as per privacy policy>

    Thanks for your help

  • NeuroPsyche

    20 Posts

    253

    0

    Posted December 3rd, 2020 10:00

    I got a new sip today to add to my Dell 2161DS-2 KVM 

    There was a paper along with the package to make sure that the firmware was above a certain level.

    I have it on the latest firmware, the newest, that is on the dell support page for the tag

    The video from this latest SIP, which was brand new, unopened, is all 'orange' or no color at all. Almost as if it was a black and white picture but replacing the black with 'orange'

     

    Anyone know what this could be?