Pete the man

updated

5 years ago

PT

Pete the man

1 Rookie

•

75 Posts

0

5286

September 23rd, 2021 13:00

Optiplex 9020 Sff beep code and light issue

hi all 

i install an os on a OptiPlex 9020 sff 

after a while the power button blink amber the hdd light blink and i hear a beep 

what could it beep the issue ?

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    3148

    0

    Posted September 27th, 2021 11:00

    If you haven't ripped off everything already... : )

    With all external peripherals disconnected, with PC off, press the test button to see if it gives you a green light.  If it does, that doesn't necessarily mean good PSU, but means internal peripherals are good.  If not, disconnect internal peripherals one by one, testing for green light in between.  For example, once it's down to the MB, and then you get a green light once it's disconnected, the MB is the problem.  Just another way to verify it.  If all internal peripherals give you the green light, then it could be that the PSU is a putts.

    Dell BIST Test 

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    3216

    0

    Posted September 23rd, 2021 15:00

    How many beeps do you hear and what sequence of lights do you see?

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • Pete the man

    1 Rookie

    •

    75 Posts

    3207

    0

    Posted September 24th, 2021 07:00

    hello 

    one beep and at the same time the power light blink amber and the hdd light also 

    Thanks 

     

  • speedstep

    11 Legend

    •

    46969 Posts

    3197

    0

    Posted September 24th, 2021 11:00

    @Pete the man 

    Please press the blue Accept as Solution button below if this post answers your question.

    Bad power supply, Bad Ram, etc.  One beep indicates its trying to display an error.

    The Diagnostic Lights should be showing a pattern.

    THREE FOUR.png

    ONE THREE PATTERN.png

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    3183

    0

    Posted September 25th, 2021 16:00

    Sorry to have to nitpick, but about how long is after a while?  Does the machine run and boot normally before it does that?

    Dell Optiplex Diagnostic Indicators  When you scroll down and see the model years, yours was introduced in 2013.

    It's normal for the HDD light to blink with activity.  Just one beep doesn't seem to indicate anything.  I checked the owner's manual.  Optiplex 9020 Documentation 

    Blinking amber (no special sequence) can mean bad PSU.  Solid amber can mean bad MB.

    Since we're not getting an understandable error code, try replacing the size 2032 CMOS battery.  A bad battery will cause all sorts of seemingly unrelated bizarre problems, including throwing confusing error codes.

    After replacing the battery, hopefully then either the machine stays running or it gives an understandable error code.

    The screengrab speedstep gave is for older model Optiplex's.  The 9020 does not have the 1,2,3,4 error code system.

  • Pete the man

    1 Rookie

    •

    75 Posts

    3159

    0

    Posted September 27th, 2021 05:00

    Hello 

    i will try first a cmos battery and let you know after 

    Thanks 

  • Pete the man

    1 Rookie

    •

    75 Posts

    3156

    0

    Posted September 27th, 2021 06:00

    Hello 

    i replace the cmos battery 

    there is no more beep but the power button blink 3 time then 2 time 

    fan spin on the cpu 

    Thanks 

     

  • Pete the man

    1 Rookie

    •

    75 Posts

    3150

    0

    Posted September 27th, 2021 10:00

    hello 

    i said 3 and 2 but in fact its 2 then 3 i see it could be a system board issue 

    very weird i was installing windows and did a reboot start check for updates then at some point i hear the beep 

    strange i will rip off everything and see if i can get away this error i check and it seems there is no blown capacitor 

     

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    3148

    0

    Posted September 27th, 2021 12:00

    From the 9020 SFF Owner's Manual:

    Capture+_2021-09-27-13-59-09.png

    First, before the above post, try reseating the RAM one by one first and see how that goes.  RAM error codes are somewhat common in this forum.

  • Pete the man

    1 Rookie

    •

    75 Posts

    311

    0

    Posted September 29th, 2021 12:00

    Hello 

    put a new cmos battery remove the beep 

    i get the code 2-3 i remove the ram stick  insert one by one following a restart each time no more code all is good 

    now