char6

updated

16 years ago

C

char6

11 Posts

0

1506

June 24th, 2010 04:00

Networker Fast Start wizard problems

Dear all,

I'am trying to setup an new networker configuration.

Windows 2008SP2 x64.

Networker Fast Start 7.6

The server is member of a windows domain and the connectivity with the rest of the network is ok, as you can see in the picture, but I face the problem that you can see in the uploaded image. Is there any reported problem about the wizard?

Any ideas?

export1.jpg

Regards,

Chris

  • coganb

    736 Posts

    869

    0

    Posted June 24th, 2010 05:00

    How have you defined the range you are discovering in?  Is this correct?  You might want to check the name resolution between the relevant machines.  Also, is this Win2k8 R2?

    -Bobby

  • char6

    11 Posts

    869

    0

    Posted June 24th, 2010 06:00

    coganb thanks. This is a Windows 2008SP2 x64.

    I had checked the "automatic discovery of hosts" option and returned the error I said.

    Now I ckecked the custom entry and I entered my desired host machine. So I overcome this error.

    Regards,

    Chris

  • char6

    11 Posts

    869

    0

    Posted June 25th, 2010 05:00

    Here I am again,

    The wizard cant find any pc if i set Autodiscovery and IP range.

    It works only with the the custom entry option and only for my server. If I set a custom entry for a test pc it gives the error in the uploaded picture.

    The connectivity is fine kai the domain name resolution is also fine. Any ideas???

    ScreenHunter_01 Jun. 25 15.41.jpg

    Regards,

    Chris

  • char6

    11 Posts

    869

    0

    Posted June 25th, 2010 07:00

    on a different case study,

    I'am trying to install emc client to a remote machine through the wizard. I apply the right credentials and i get this.

    ScreenHunter_03 Jun. 25 17.38.jpg

    what happening here? why I am faceing so strange problems? any ideas?

  • char6

    11 Posts

    869

    0

    Posted June 28th, 2010 00:00

    anyone?

  • coganb

    736 Posts

    869

    0

    Posted June 28th, 2010 05:00

    you sure you have the Administrator host credentials correct?  You might want to try adding another host to see if the problem is related to this host or something else.

    -Bobby

  • char6

    11 Posts

    869

    0

    Posted June 28th, 2010 05:00

    Hello coganb,

    Yeap wherever i tried the result is the same. to ensure that I created a local administrator and again the result is the same.

    Is there any issue with the win2008 version of windows server and the wizard?

    Regards,

    Chris

  • char6

    11 Posts

    869

    0

    Posted July 5th, 2010 05:00

    anyone?