
Solved!
Go to SolutionD2
DeaconZ28-2015
1 Rookie
•
252 Posts
0
5017
January 25th, 2016 06:00
Networker 8.2 console backups failing
Recently upgraded to Networker 8.2.2.3 from v. 8.2.1
Message:
--- Unsuccessful Save Sets ---
* backupserver:NMCASA:/gst_on_backupserver/lgto_gst 69703:savepsm: Ignoring unrecognized option 'a', use '-h' to see usage
* backupserver:NMCASA:/gst_on_backupserver/lgto_gst 69703:savepsm: Ignoring unrecognized option 'a', use '-h' to see usage
* backupserver:NMCASA:/gst_on_backupserver/lgto_gst 24050:savepsm: FAILED HY000 -697 [Sybase][ODBC Driver][SQL Anywhere]Error during backup/restore: XBSA-1.0.1 8.2.2.3.Build.958 3568 Mon Jan 25 08:51:41 2016 _nwbsa_is_retryable_error: received a network error (Severity 5 Number 13): Permission denied
* backupserver:NMCASA:/gst_on_backupserver/lgto_gst
backupserver:NMCASA:/gst_on_backupserver/lgto_gst: retried 5 times.
--- Successful Save Sets ---
* backupserver:savefs savefs backupserver: succeeded.
* backupserver:index 86704:save: Successfully established DDCL session for save-set ID '3785762936' (backupserver:index:bb348faa-00000004-45f0a8f6-45f0a8f5-00010000-0a680426).
backupserver: index:backupserver level=full, 90 MB 00:00:12 427 files
* backupserver:index completed savetime=1453729909
* backupserver:index 94694:save: The backup of save set 'index:bb348faa-00000004-45f0a8f6-45f0a8f5-00010000-0a680426' succeeded.
* backupserver:bootstrap 86704:save: Successfully established DDCL session for save-set ID '3768985730' (backupserver:bootstrap).
backupserver: bootstrap level=full, 86 MB 00:00:20 428 files
* backupserver:bootstrap completed savetime=1453729922
* backupserver:bootstrap 94694:save: The backup of save set 'bootstrap' succeeded.
Troubleshooting performed:
Repaired console installation
Reinstalled console and DB, moving from original location in "Program Files (x86)\Legato\Management" to "Program Files\EMC Networker\Management"
Verified SYSTEM has permission to install dirs and DB dir.
Backup also fails from CLI with this output:
C:\>savepsm -I "C:\program files\EMC Networker\management\GST"
24050:savepsm: FAILED HY000 -697 [Sybase][ODBC Driver][SQL Anywhere]Error during backup/restore: XBSA-1.0.1 8.2.2.3.Build.958 940 Mon Jan 25 09:02:23 2016 _nwbsa_is_retryable_error: received a network error (Severity 5 Number 13): Permission denied
Responses (21)
Solutions (0)
DeaconZ28-2015
1 Rookie
•
252 Posts
1221
0
Posted January 25th, 2016 06:00
Correct. I created the client resource using the console setup menu.
Reply DeaconZ28-2015
1 Rookie
•
252 Posts
1221
0
Posted January 25th, 2016 06:00
Both running as SYSTEM in Windows 2008 R2.
Reply DeaconZ28-2015
1 Rookie
•
252 Posts
935
0
Posted January 25th, 2016 07:00
Hrvoje, I'm not sure I see the relevance of that, but I have the following configured:
Backup renamed dirs - no
Client direct - Yes
Data Domain / IP - Yes
Reply DeaconZ28-2015
1 Rookie
•
252 Posts
936
0
Posted January 25th, 2016 07:00
Ok, I will open a case with support. And its on the same server as NW server. Its a minor issue anyway. Thanks!
Reply DeaconZ28-2015
1 Rookie
•
252 Posts
936
0
Posted January 25th, 2016 07:00
I turned off the DD setting and ran it again. Still get:
24050:savepsm: FAILED HY000 -697 [Sybase][ODBC Driver][SQL Anywhere]Error during backup/restore: XBSA-1.0.1 8.2.2.3.Build.958 5608
Mon Jan 25 10:50:01 2016 _nwbsa_is_retryable_error: received a network error (Severity 5 Number 13): Permission denied
Reply DeaconZ28-2015
1 Rookie
•
252 Posts
1221
0
Posted January 25th, 2016 07:00
Correct. I have a separate job that backs up the filesystem, including the client index dirs and bootstrap succeeds as well. It's just not able to access a file it seems (I'm guessing) during the console backup.
Reply

adeelmehmood
1 Rookie
•
21 Posts
2070
0
Posted January 25th, 2016 21:00
HI,
We faced the same issue and was asked by support to downgrade to 8.2.2.2
After few days , Support told us to upgrade it to 8.2.2.3 and apply an hot fix , which resolved the issue.