I'm trying to make this combination work in daisy chain. Everything was verified and works with newer monitor from HP already supporting MST on the second position. It was working in both DP 1.1 and DP 1.2 settings on that monitor. However, with P2414Hb the system (newest Win 10 x64 Pro) detects to screen type and see also the proper resolution, but the screen remains always black. I have tried the video connection through USB-C and also thru DP to the main monitor with no change in behaviour.
Is there any firmware or other magic I can try to get it working? Last what comes to my mind, is to get a DP to DVI cable and give it a try again. Any other ideas?
@M4jky I now seem to remember people having daisy chain issues when trying to use older displays, in fact the P2414H in particular may have come up in previous threads. In any case, in terms of an active DP to DVI adapter, Cable Matters is one of the vendors I use often for cables and adapters like this, and they make this one. Good luck!
The second monitor type is P2414Hb not 19. Can the type in the name and labels be changed by an admin please? I didn't find the edit option anywhere and I don't want to cause confusion.
@M4jky You’d need to enable DP 1.2 mode since 1.1 never supported DisplayPort MST, i.e. daisy chaining. But in terms of helping you, please detail exactly how you have cabled everything, including any adapters/dongles involved, and for cables that have a different connector on each end, make sure it’s clear which connector is plugged into which device. A DP to DVI adapter is not going to help you because DisplayPort daisy chaining requires native DisplayPort signaling along the entire chain, which means using USB-C, DP, or Mini-DP all the way. There is a small exception for the LAST display in the chain if you use active adapters, since that sort of allows you to cheat, but that is an edge case. If you’re already using the DisplayPort all along the chain, then this might be a case of something that SHOULD work in tech not ACTUALLY working. If that’s the case, then an active adapter might actually allow you to work around the problem. Here is one example of an appropriate active adapter. I have recommended that specific product to multiple users here for feeding the last display in a daisy chain and have received multiple success confirmations from users about using it that way.
I'm not using any adapters on the way and have tried these two setups with same result, black screen on the last monitor.
First setup: USB-C to USB-C original cable from laptop to P2422HE - > original DP cable to the second P2414H
Second setup: both original DP cables delivered with P2414H, or I have tried also the original DP cable from P2422HE to first or second display with no change in behavior.
The same cables are working with newer display with MST technology as a second monitor, so I suppose the cables are correct.
Do you have any suggestion for such an active adapter from DP to DVI? The second monitor does not have HDMI connection.
@M4jky Great news, and thanks for reporting back. I’m not sure why regular DisplayPort doesn’t work properly on those older displays, but I’m glad you found a suitable workaround!
jphughan
11 Legend
•
13985 Posts
•
79931 Points
6797
1
Posted July 12th, 2021 07:00
@M4jky I now seem to remember people having daisy chain issues when trying to use older displays, in fact the P2414H in particular may have come up in previous threads. In any case, in terms of an active DP to DVI adapter, Cable Matters is one of the vendors I use often for cables and adapters like this, and they make this one. Good luck!