Squatting Bear

updated

2 months ago

SB

Squatting Bear

1 Rookie

•

6 Posts

•

34 Points

0

485

September 19th, 2026 00:24

Latitude 5491, question about upgrading SSD

I have a Latitude 5491 with a 500GB SSD.  I'm thinking of replacing the SSD with a 1TB drive.  I image the old drive regularly with Macrium Reflect.  Can I just restore the most recent image to the new drive?  (I'd really like to avoid having to reinstall all the programs on the new drive, and then figure out how to get all the relevant data on there.)  Also, any recommendations on drive specifics?

(edited)

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    37

    0

    Posted September 19th, 2026 08:13

    Hi

     

    The BIOS boot manager will point to the current storage device, and when you fit the new one you may need to adjust the boot order.

     

    Otherwise I would expect the transition to go smoothly.

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Squatting Bear

    1 Rookie

    •

    6 Posts

    •

    34 Points

    19

    0

    Posted September 19th, 2026 20:04

    @anne_droid​ One other question occurs to me.  Will I need to extend the partition once I do the restore, or will this happen without my intervention?  (I have Aeomi Partition Assistant.)

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    12

    0

    Posted September 19th, 2026 23:37

    Hi

     

    I do not really know, I use Paragon Partition Manager.

    It would be nice to have a D:\ for some DATA, so that any future re-install wont necessarily overwrite it.

     

    So a LARGE C:\ certainly, then .........

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    11

    0

    Posted September 20th, 2026 05:53

    Hello @Squatting Bear , since you are familiar with Macrium Reflect, you can use it and perform cloning the old drive to the new drive by dragging all partitions from old drive to the new drive. 

     

    Assuming the C: partition is the third one and before the last partition, just select the last partition then select flush right to open the remaining space right after the C: partition.  Then select C: partition and select fill space.  That should expand all remaining space to the C: partition.

  • Squatting Bear

    1 Rookie

    •

    6 Posts

    •

    34 Points

    11

    0

    Posted September 20th, 2026 12:54

    @Chino de Oro​ Please excuse me; I'm old and a little slow sometimes.  I wasn't thinking about this in terms of adding another drive.  I've never been inside this particular machine, but figured I'd remove the old drive, install the new drive, and restore.  I've never used the cloning feature of Reflect, so that didn't occur to me.  I usually image the drive, or sometimes do a Files and Folders backup.  So are you suggesting I have more than one slot that can accept an internal drive?

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    9

    0

    Posted September 21st, 2026 02:16

    My comment was mainly showing you how to extend the partition on the new drive.  Although, the Latitude 5491 supports dual SSD.  It must be configured at purchase and not available after initial purchase.  See storage specs for further info  https://www.dell.com/support/manuals/en-us/latitude-14-5491-laptop/lat5491_setup_specs/storage?guid=guid-a27c8efe-cbcd-4586-b1eb-e9fa9603cbe2&lang=en-us

     

    However, to clone your current drive to a new, larger drive can be done with a drive enclosure connecting to USB port as well.  Cloning is easy with Macrium Reflect.  Review the cloning process and post if you have any question  https://www.macrium.com/blog/cloning-a-disk-with-macrium-reflect-v8

     

  • Squatting Bear

    1 Rookie

    •

    6 Posts

    •

    34 Points

    12

    0

    Posted September 21st, 2026 11:42

    Got it, thanks!  I had read elsewhere about having to order dual drive capability at purchase. This machine is refurbished, so that option wasn't available to me.  Obviously, I've never used cloning, although I've imaged with Macrium for many years.  I'll bone up on it while awaiting the new drive.  Their community is also quite helpful.

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    23

    1

    Posted September 21st, 2026 19:26

    You're certainly welcome and yes, Dell Community has many volunteered Tech Experts and Rockstars whom have done excellent jobs in assisting members with tech issues.

  • Squatting Bear

    1 Rookie

    •

    6 Posts

    •

    34 Points

    28

    0

    Posted September 22nd, 2026 21:56

    @jamessmiteo​ Good advice, thanks.  I'm embarrassed to say that I've been using Macrium for more than a decade, and was unaware it could manage partitions in the way  you describe.  I was planning on leaving the 500GB drive as is until the new drive is in place and functioning.  The new drive is expected tomorrow and I'm excited to make the swap.

  • Chino de Oro

    11 Legend

    •

    8569 Posts

    •

    47224 Points

    11

    0

    Posted September 22nd, 2026 22:34

    @Squatting Bear, note that your image restore will work if you had imaged the whole drive with all partitions.  It will not work if you had only backup of the drive C:.