Vajinap

updated

17 years ago

V

Vajinap

47 Posts

0

618

July 22nd, 2009 14:00

V1 replication

We are trying to replicate files from source celerra which is using 5.6 DART code and using V1 version for replcation. So before setting replication can anyone please tell what are the considertaions to be made any documents to refer. We have configured some ip addresses on the data movers on the destination side for replication. How to select a particular interface for replication on the data mover.

Thanks,
  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    298

    0

    Posted July 24th, 2009 03:00

    or search the Celerra Manager online help for "deploy replication" (without underscore)
    and you'll find a page called Enable Replicator V1
  • Vajinap

    47 Posts

    298

    0

    Posted July 22nd, 2009 20:00

    heyy DYNAMOX thanks for the info.

    we have only NFS environment. so in version v1 with 5.6 do we need to create the data mover interconnect between the source and target celerras. we have some dedicated interfaces for replication on the target celerra. so how actaully we can implement. can anyone give me a clear picture on this. any documents... .

    Thanks,
  • Peter_EMC

    674 Posts

    298

    1

    Posted July 22nd, 2009 22:00

    Just use the document Dynamox was referring to, if the link is not working, search powerlink for "Using Celerra Replicator (V1)"

    One of the first questions is? Why do you want to use Rep V1 instead of V2?
    You can not use the Celerra manager GUI for setting V1 up, this is just working for V2.

    For V1 you do not need interconnects.
  • Vajinap

    47 Posts

    298

    0

    Posted July 23rd, 2009 06:00

    heyy thanks very much for you info. All the source celerras are running V1 version with 5.6 code. So on the destination side we are planning to use the same version. one more quick question we installed 5.6 DART code on our new celerra , how can we enable V1 version on that. we didnt enable V2 version yet on that box. so any suggestions.

    Thanks,
  • Peter_EMC

    674 Posts

    298

    0

    Posted July 23rd, 2009 06:00

    how can we enable V1
    version on that.


    Search the user documentation for deploy_replication