Aurora R12, furious, Dell breaks even further with 1.1.4 Bios
Bios 1.1.4 was pushed today via windows update and low and behold, Dell broke XMP. It no Longer functions what so ever even on stock OEM ram doesn't matter. Just great now my performance in games tanked massively, lovely.
UPDATE
Was able to flash back to 1.1.2. XMP working as intended again, Do NOT allow the WUP bios 1.1.4 update to proceed if it pops up for you, breaks XMP entirely
In my case, upgrading the BIOS from 1.1.2 to 1.1.4 Resulted in my 3D Benchmark score (Time Spy) goes from ~17700 to ~15200 with the same overclock settings. Experimenting a bit it seems that if I just overclock the memory, everything more or less works as expected but the minute I overclock the CPU too, performance goes down the drain. There is no thermal throttling kicking in, BTW.
I tried reverting to 1.1,2 and that worked but the same problem still seem to be present so I wonder if there is something else at play here.
Should be, mine auto updated back to 1.1.4 after but I just reflashed .2, deleted the .4 firmware from device manager so it would stop trying to flash it and blocked the update with the update block tool Microsoft provides. I forgot to mention I am on the preview release insider ring so this is a release that Dell should put out pretty soon albeit hopefully fixed. Anyone on the insider program should ignore the firmware upgrade
You must remove the firmware from device manager, then disable UEFI capsule windows update in the bios and then flash 1.1.2 back. I'd suggest also blocking the update. I had it reflash itself after reboot back to 1.1.4 twice before I blocked the update and disabled UEFI capsule
Same here - with all the issues around latency and Gear 1/2 (which I confess I don't fully understand), I'm just wondering whether I ask for a refund as my £4,000 machine clearly isn't running to advertised specs (3400mhz RAM) and Dell seem incapable of fixing it?
BrunoGA
9 Posts
4505
0
Posted July 22nd, 2021 15:00
In my case, upgrading the BIOS from 1.1.2 to 1.1.4 Resulted in my 3D Benchmark score (Time Spy) goes from ~17700 to ~15200 with the same overclock settings. Experimenting a bit it seems that if I just overclock the memory, everything more or less works as expected but the minute I overclock the CPU too, performance goes down the drain. There is no thermal throttling kicking in, BTW.
I tried reverting to 1.1,2 and that worked but the same problem still seem to be present so I wonder if there is something else at play here.