UNSOLVED

Dilbert99

updated

5 years ago

D

Dilbert99

8 Posts

0

514

April 2nd, 2022 20:00

doing laptop reset on XPS 9550 then blank screen on startup

I bought a new Dell XPS Desktop a couple of weeks ago and then tried to reset my old Dell XPS 9550 laptop via "reset this pc" so it was fresh for others in household to use.

Not sure what happened but I cannot boot the laptop anymore.

Prior to doing this, I used the laptop to create a 32GB recovery stick.

Things I have tried:

  1. Power button then F2 or F8 or F12 - nothing (read that F8 does nothing on windows 10, F2 for bios?, F12 for recovery/os perhaps)
  2. Power button then D - screen cycles through different colours
  3. Laptop off, power cable disconnected, CTRL+ESC then plugin power - flashing 3 White, 3 Amber/Orange - suggests no recovery image found
  4. Couldn't find bios.exe, but could find XPS_9550_1.14.0.exe renamed to BIOS_IMG.rcv on usb stick, plug that in and CTRL+ESC, plug in power blank screen, solid white light on front of laptop.
  5. Tried unplugging cmos battery for 15 mins, turn on laptop and black screen, F2 or F12 on pressing power button does nothing.
  6. Downloaded OS Recovery tool and made windows 10 home recovery image on 16gb usb stick for my laptop service tag (via new desktop), it had a word doc download on completion with instructions to restart and F12, but I don't even have the dell logo - black screen. Also tried CTRL+ESC - 3 white, 3 amber flashing lights.

Not sure what to try to fix this

Thanks

  • Dilbert99

    8 Posts

    375

    0

    Posted April 2nd, 2022 21:00

    Note - I haven't been through a bios flashing at any time during any of the above steps...

    So have not aborted any flashing in progress

  • Dilbert99

    8 Posts

    364

    0

    Posted April 3rd, 2022 00:00

    I took out the ssd and put it in an enclosure and connected it via usb to my working dell desktop.

    It had the original issue I had after the reset which was "user profile could not be loaded", I accessed the profile and copied my ntuser.dat file across, and that got rid of the user profile could not be loaded message but didn't give me a populated windows screen. I could see task manager, and switch user/logout. I also copied the default profile from desktop to laptop but not sure that would show up as a user.

    So SSD is ok and some level of windows install on it and a user account that is accepting both pin and windows password when attached to another PC.

    I have a windows 10 installation thumb drive but same as my recovery usb, F12 on startup does nothing. Neither does F2.