UNSOLVED

Sedona John

updated

4 years ago

SJ

Sedona John

1 Message

0

6193

January 25th, 2022 12:00

XPS 8940, BIOS 2.013 to 2.4.0?

Today I just had my Dell XPS 8940 serviced by a Dell Technician onsite at my house. My issue I was have difficulty installing a BIOS Update. The installed version on the system is Version 2.013 and there is a latest Version 2.4.0. My question, should I install the latest version 2.4.0?

  • DELL-Cares

    Moderator

    •

    27843 Posts

    •

    745 Points

    1760

    0

    Posted January 26th, 2022 06:00

    Thank you! We have received the required details. We will work towards a resolution. In the meantime, you may also receive assistance or suggestions from the community members.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • DELL-Cares

    Moderator

    •

    27843 Posts

    •

    745 Points

    1760

    0

    Posted January 26th, 2022 06:00

    We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.


    #IWork4Dell

    For all non-technical issues that require your private data, we must communicate via a private Direct Message
    Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1728

    2

    Posted January 26th, 2022 13:00

    @Sedona John  That depends....

    There are threads saying XPS 8940 BIOS versions later than 2.0.13, prevent the PCI-e x4 slot from working properly.

    Users who were using an NVME SSD plugged into a PCI-e adapter in the x4 slot are no longer able to use the SSD, even though that same SSD+adapter worked perfectly in the slot before updating beyond 2.0.13.

    Don't know if this only affects SSDs connected to the x4 slot, but you have to weight the advantages of the security fixes offered by the latest BIOS versions vs possible loss of use of the x4 slot...

    The fix will probably require another BIOS update but there's no way to know when it might be released.

    Only you can decide what's best for your situation...

  • AuroraSu

    28 Posts

    1664

    1

    Posted January 29th, 2022 23:00

    System get random hang (freeze not BSOD) after install 2.4.0 from 2.3.0.

    Seems another screw up by Dell.

     

  • ispalten

    7 Practitioner

    •

    2650 Posts

    •

    9771 Points

    1654

    0

    Posted January 30th, 2022 04:00


    @AuroraSu wrote:

    System get random hang (freeze not BSOD) after install 2.4.0 from 2.3.0.

    Seems another screw up by Dell.

     


    Interesting?

    It has happened to me twice. Once on Zoom and once playing a game. Only recovery, power off the 8940 using the power button.

    In both cases I thought it might be sound related with my mouse which I was moving when it locked up.

    My mouse is wireless, a Logitech combo with the keyboard and USB receiver. My sound is the Nvidia High Def. Audio which I feed to my Dell display via HDMI from my RTX2060.

    There was an Nvidia RTX20xx update on its website that is much newer than the one I was using. Dell Care said I could try it. Since I installed the newer driver it has not happened. However, with only having it happen twice I can't be sure if it solved?

  • UNCCEJ

    1 Message

    1527

    0

    Posted February 10th, 2022 07:00

    I am having a similar issue after updating to 2.4.0 yesterday. Have been running fine until update, and since then have had 2 hang/freezes since updating.

  • bdtnr

    1 Rookie

    •

    43 Posts

    1473

    0

    Posted February 19th, 2022 09:00

    Same issue for me, system had been working fine, get random freezes, requires a power recycle to get it back after upgrading BIOS to 2.4.0.  Highly recommend NOT upgrading if you can.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1468

    0

    Posted February 19th, 2022 11:00

    @bdtnr  Have you looked in Windows Reliability Monitor to see if it logged any of these freezes and the cause?

    Try disabling Dell's SupportAssist and Dell Update so they don't load automatically when you boot and see if that helps. Look on Startup tab in Task Manager, and/or click Start>Run>services.msc and click ok.  When that opens, set the Startup type for these services to disabled. Do NOT change anything else in services.msc.

    Close services.msc and reboot. Monitor for freezes now...

  • bdtnr

    1 Rookie

    •

    43 Posts

    1226

    0

    Posted February 19th, 2022 16:00

    So, neither of the services is listed in my Startup Apps.  I have Disabled startup for Dell SupportAssist and Dell SupportAssist Remediation.  I don't even show the Dell Update service.

    Regarding reliability monitor, it appears my freezes are "about" every other day (2/7, 2/10, 2/12, 2/14, 2/16, 2/18).  On a daily basis, the PC-Doctor Module stops working (typically 2 or more times/day).  It also tells me of a critical Windows event, but simply says Windows was not properly shut down.

    Thanks for your assistance.  I'll keep monitoring.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    826

    1

    Posted February 19th, 2022 17:00

    Now we're getting somewhere. PC-Doctor is part of SupportAssist.

    The Windows "not shut down properly" message is a generic error meaning you forced the PC to reboot without using Start>Power>Shutdown or Start>Power>Restart - which you obviously couldn't do if the PC froze.

    Download and install Revo Uninstaller (free). Launch Revo and use it to uninstall SupportAssist. It should offer you the option to set a System Restore point before it does anything. So be sure to accept that offer, to be safe.

    When Revo gets toward the end of the uninstall, it will show you "leftover" files in bold on several screens that weren't uninstalled. Select only the ones shown in bold on each screen for deletion and click the delete button before going to next screen. Take care not to select anything listed in red for deletion.

    When Revo is finished with SupportAssist, if it lists SupportAssist Remediation, uninstall that one too, following the procedure above. Reboot when Revo is done and monitor for freezes.