I managed to fix the skipping music problem in WMP11 and when I set up my speakers in quad mode and run the test utility I get audio in all four speakers. BUT...
When I play music in WMP11 it only comes through the
front speakers. This worked before applying the above "fix". I've gone back and unticked the "disable all enhancements" box and all the speakers work again but I then have the original audio skip problem.
So "disabling all enhancements" is also disabling 4 channel audio in WMP!
My machine is a dimension 9150 running vista home premium and sigmatel 92xx audio codec.
i had the same problem on my 9150. The solution is fairly simple:
open Control Panel\Hardware and Sound\sound\manage audio devices\ on the advanced tab lower the default format, i have the best results with 16 bit 44100 Hz cd quality.
No matter what format I select I still get the audio skipping problem which goes away when I tick the disable enhancements box. (
low rate selection does not fix the skipping , the skipping I get is only ever in the last 20 seconds of the track)
The problem is still the same
if I tick "disable all enhancements " I get 2 channel audio with wmp11 but NO skipping. (The test utililty still works on all 4 channels).
If I untick "disable all enhancements " I get all four channels and
audio skipping at the end of each track.
I have just tried an alternative media player and this plays back flawlessly through all 4 channels.
It looks like this problem is caused by WMP11, I've looked through the options in WMP and there seems to be no way to change anything to do with speaker output.
ricolit
66 Posts
364
0
Posted April 17th, 2007 10:00