UNSOLVED

Chalease

updated

22 years ago

C

Chalease

2 Posts

0

10669

January 24th, 2005 22:00

Need help with my monitor

I'm able to turn the computer on and get as far as the windows xp professional screen then it fades to an all black screen.
Please help
Thanks in advance
  • Flooby

    2 Intern

    •

    3031 Posts

    777

    0

    Posted January 25th, 2005 11:00

    Sounds like a bad display adapter to me.  It always helps if you include some specific information regarding the system model.  In this case, it would also help to know if you have integrated video, or if it's controlled by a card.  If a card, did that replace integrated video?  If so, you can re-enable the integrated video and see if the situation improves.  If it does, it would seem that your video card is bad, or that the drivers for same are.

    I'm also curious as to what this has to do with SP2.  If this occurred immediately after installing SP2, that fact should be noted in your initial post, as the suggestions for resolution in that event might include uninstalling SP2.

    Message Edited by Flooby on 01-25-2005 08:04 AM

  • Chalease

    2 Posts

    777

    0

    Posted January 25th, 2005 12:00

    My newphew was trying to do me a favor and free up memory on my harddrive since my computer was running slowly. But it never came back up completely. It starts ask for password then windows logo runs for a few seconds then the black screen appears. I don't understand how the screen can work properly for everything else but the login screen
  • Flooby

    2 Intern

    •

    3031 Posts

    777

    0

    Posted January 25th, 2005 14:00



    @Chalease wrote:
    My newphew was trying to do me a favor and free up memory on my harddrive since my computer was running slowly. But it never came back up completely. It starts ask for password then windows logo runs for a few seconds then the black screen appears. I don't understand how the screen can work properly for everything else but the login screen


    "I don't understand how the screen can work properly for everything else but the login screen"

    Now you're saying something different from your first post, where you mentioned nothing beyond the WinXP logo.  How do you know everything else works, if you can't get past the login screen?  System Setup and the Windows boot logo don't depend on the display adapter for video rendering, that's why you can see them.  The reason for this is that the display adapter drivers usually haven't finished loading until some time after the XP logo appears.  If you're actually seeing the logon/password screen (which you didn't mention in your initial post), that's another story, as the display adapter drivers should have loaded by that point. 

    You're probably going to want to boot to the Windows XP CD and do a Repair Reinstallation of WinXP, since it sounds like that nephew hasn't been anything approaching helpful, as far as some of your system files are concerned.  I'm not sure what freeing up memory and your hard drive have to do with each other, since they're two separate (and very different) components, but I suspect that someone's lack of familiarity with the two terms (and the proper methods for freeing up drive space and system memory) may have a lot to do with your current difficulties.

    http://support.microsoft.com/default.aspx?scid=kb;en-us;315341  How to perform an in-place upgrade (reinstallation) of Windows XP

    If this is successful, I'd suggest finding an alternate party for maintenance duties, too.

  • gtoons

    2 Posts

    777

    0

    Posted January 25th, 2005 22:00

    try restarting in windows safe mode and running system restore.  SP2 is causing problems on some of the dell dimension desktop and will lock up the computer after the windows start screen.  I am currently dealing with the same problem when I install SP2 on the dell I am working on currently. 

    to enter safe mode when your computer locks up restart manually by shutting down the power to your computer.  When you restart the system a screen will come up telling you windows was not shut down properly and will give you some options.  The option you need to choose should be just safe mode, not safe mode with command prompt.  Then when windows starts your display will look fuzzy or the colors will be wrong but follow the prompts through and it will allow you to step your computer configuration back to a point before you installed SP2.  You may not be able to use SP2 till dell offers a fix to the problem.

  • nickwsu

    2 Posts

    777

    0

    Posted January 29th, 2005 00:00

    My g/f is also having trouble.  She installed SP2 last night and shortly thereafter, the computer froze and will not reboot.  The computer powers up ok, but it is always a black screen.
     
    Does SP2 sometimes have this effect on video cards/drivers? (FYI, it is a seperate 32mb card in a dimension 4200).  If so, how can I reinstall the drivers, or even XP for that matter if I cannot see the screen. 
     
    Is a new video card the only option here?
     
    Thanks
  • moongdss

    7 Posts

    777

    0

    Posted January 29th, 2005 20:00

    I too am having the same trouble, but it's not everytime that the computer screen goes blank.  One in about every 5 times it loads without incident.  Here's the specifics:  Power comes on, bios/DELL screen appears, windows logo screen appears, then it blanks out and doesn't come back on.

    I know my Inspiron 2500 laptop loads completely each time as I can hear the windows opening music, and through memorized keystrokes, I can log out of windows XPsp2 successfully (can hear closing music too.)  After reading the video adapter/driver info here, it clicks that this is my trouble as well.

    Once I'd gotten the thing loaded right, I checked the drivers (tried updating, but they seem fine) and no hardware conflicts or troubles that Hardware Profiles registers.  I wasn't terribly certain if this problem coincided with SP2 or not... so I formatted my hard drive and reinstalled XP clean.  I don't seem to have to issue until SP2 arrives, but I'm no expert in anecdotal science.

    Is there a fix for this or is my 1 in 5 loads successful to be the norm?  Does this sound like hardware or software?

    I feel your pain folks!!

    Diana 

    Message Edited by moongdss on 01-29-2005 05:00 PM

  • moongdss

    7 Posts

    777

    0

    Posted January 29th, 2005 21:00

    hope this link proves helpful to someone else.  I attempted manually updating my display adapter driver and I'm still having the same issue.  Mine is Intel 82815 graphics controller, driver version 6.13.1.3198, 6/8/2001... I even tried loading an older driver, but I'm having the same trouble.

    http://support.intel.com/support/graphics/sb/CS-009479.htm#810/815

     
    I guess my trouble is hardware then...  According to DELL, the Inspiron 2500 video adapter is integrated (with the motherboard?) so it cannot be replaced or upgraded.
     
    *sigh*  I hope someone else has better luck (or emails me that I'm waaaaaaay off base, lol)
     
    guess I'm stuck with the 1 in 5 after all, next is to just unistall SP2 (a reformatting we will go...) and see if the problem persists, meaning my video adapter is really shot.
    Diana
     
     

    Message Edited by moongdss on 01-29-2005 05:56 PM

  • gtoons

    2 Posts

    777

    0

    Posted January 30th, 2005 17:00

    What I am finding is that dell has a tendency to use a lesser model processor and they normally request certain specifications for their hardware such as video and audio settings. I haven't had much luck with upgrading the drivers I can find. Windows does offer a couple of patches for the dell processors before you install SP2 but no luck so far for myself. Another problem has been the ATA100 drivers for dell motherboards but once again no luck on that. I would be very hesitant with installing a new video card. It may fix the problem but I wouldn't bet on it.

    Have you done a Bios update??
    Available for download from dell...

    http://support.dell.com/support/topics/global.aspx/support/kb/en/document?dn=1090448&c=us&l=en&s=gen&cs=#step1

    Dell does have this information on their site mentioning that spyware and removal tools can have some unwanted affects for you SP2 install. I personally recommend Adaware produced by Lavasoft.
    available for download here
    http://www.download.com/Ad-Aware-SE-Personal-Edition/3000-8022_4-10319876.html?tag=lst-0-1


    Try doing a system restore prior to doing a full reinstall.
    Try running adaware prior to installing SP2.
    If you are still having the same problems just make sure you have SP1 then use your own firewall and just doen't install sp2. I have worked on 6 different systems in the last 2 weeks and this dell is the only system that I am unable to put SP2 on. Every other system has take SP2 the first time with no problems. SP2 is a fairly good firewall but it doesn't really offer you enough to warrant purchasing a new video card for, I would save your money and have a nice system built for you when you are ready.
  • moongdss

    7 Posts

    777

    0

    Posted January 31st, 2005 11:00

    " I would save your money and have a nice system built for you when you are ready. "
     
    That's where I am now... the laptop isn't my main computer (Dell desktop works great!!) so I'm not terribly pressed to have it up to tippy top shape.  I was having other issues with Norton slowing the system down (and not uninstalling fully), so I formatted the hard drive, loaded XP, EZArmor Virus/firewall and Adaware (love this program!!) and ran scans prior to downloading SP2, and I created restore points at every step...so all should be fine to roll back to. 
     
    Or I may just take the re-format route.  I partitioned the teeny harddrive to allow for faster load-up, but I really don't have anything on the laptop (mainly because it's not terribly usable) so may ditch the partition.  So many choices!!  All I need is an 8 hour day to kill, lol  :robotvery-happy:
     
    Thanks for all the help!   I'll try the BIOS update first.
     
    Diana  
  • jebsterino

    1 Message

    192

    0

    Posted February 28th, 2005 16:00

    Does anyone have a fix for this yet?  I have upgraded several Inspiron 2500s with the 82815 chipset to XP and all have had the same problem after installing Windows Updates.   The work around I have found is that if you hook up an external monitor and use FN-F8 to switch between the external display and the laptop's digital flat panel display, the flat panel will come back to life and then it seems to be okay for a while.  At least until the next time it does updates from Microsoft.   Then the problem returns.  I've tried Microsoft's drivers, Intel's drivers, and Dell's drivers, and all seem to have the same problem.