UNSOLVED

gdwrnch3

updated

20 years ago

G

gdwrnch3

2 Intern

•

3278 Posts

0

13385

February 4th, 2007 19:00

Just installed Vista Business on XPS 400 w/Raid 0

Set bios to raid on, cntrl-I into raid bios, configured a 467gb stripe, boot from DVD rom, clean install, Vista installed in 20 minutes.
Didn't have to add drivers, Vista saw my stripe, and installed without any issues.
 
  • nyrnd

    72 Posts

    256

    0

    Posted February 5th, 2007 09:00

    I also am about to install Vista with a XPS 400.   Can you explain the RAID stuff?  I just don't get it.  I have two SATA drives, each 160 GB.  I keep reading about RAID but don't know where to find it on my computer.  Vista advisor does not mention it as a potential problem.
  • imranxp

    6 Posts

    256

    0

    Posted February 5th, 2007 12:00

    Raid is more like an option in the BIOS. You have to set the BIOS and the raid configuration for the system.
    If you setup your PC as raid 0 (striping) it requires 2 hard-drives(min). The two 160gb's you have will show up as ONE in windows. But it will be extremely fast.
     
    This link will explain raid better then I can.
     
     
  • imranxp

    6 Posts

    256

    0

    Posted February 5th, 2007 14:00

    Yes keep in mind you'll have to format your pc and re partition the drive.
  • nyrnd

    72 Posts

    256

    0

    Posted February 5th, 2007 14:00

    Thanks, I now understand.  Since my PC came with only one and I added the second, I should be ok.
  • nyrnd

    72 Posts

    256

    0

    Posted February 5th, 2007 15:00

    I don't plan a clean install, doing the upgrade
  • getelevated

    15 Posts

    256

    0

    Posted February 5th, 2007 16:00

    I would recommend installing the Intel Storage Matrix drivers from Dell for the XPS400 soon after you get Vista on there. I had the drivers from Intel on there for a while and the RAID was not working correctly, I had issues with performance. The drivers that Dell put out last week or so resolved all of those issues. Vista even sees the drive as RAID1 now and I can see the status of the drives without having to boot into the storage program.
  • imranxp

    6 Posts

    256

    0

    Posted February 5th, 2007 18:00

    you cant do the upgrade unless you do a raid partition if you plan on going raid 0.
     
  • nyrnd

    72 Posts

    256

    0

    Posted February 7th, 2007 01:00

    I didn't plan on doing a raid anything.  I was just on with Dell and they advised me I can just install the upgrade and the drives would be fine.  This whole raid thing has really been confusing.  I just want to install the upgrade and move on but based on all your inputs this raid situation is something I need to work on.
  • gdwrnch3

    2 Intern

    •

    3278 Posts

    256

    0

    Posted February 7th, 2007 09:00

    Yes, if you are showing 2 seperate drives in my computer, and you can acess both of them indivually, you don't use raid. Install should be no problem.