It depends on the version of VNX OE that is running.
1) Older than 7.0.35.3/05.31.000.5.502, this requires engaging your service provider as you will not have visibility to an important step to manually fuse the file with the block components. This is noted in the following KB article:
emc269625:"Changing Control Station and SP IP addresses on 7.0.12.0 - 7.0.14.0 VNX Unified systems only"
2) If on the other hand you are running 7.0.35.3/05.31.000.5.502 or newer, you can use the steps as noted in the following KB article:
emc279637:"Changing Control Station and SP IP addresses on 7.0.35.3 VNX Unified systems"
I am trying to follow the emc279637 KB article, and I run into trouble during the very first step: I cannot get the serial console connection operational.
I use the settings mentioned in the article: Speed 19200, Data bits 8, Stop bits 1, Parity None, and Flow Control None
The null-modem cable I am using is OK: it works fine for serial connections to other devices.
I've tried using Hyperterminal and putty, both result in the same.
All I get when I use these settings is some random character each time I enter a key. Things like "ü½ã" and such.
Using the serial cable shipped with the VNX5300 was the solution to my problem. Although it keeps me wondering why my other null model cable isn't working with the VNX5300?
The serial port is on the rear of the CS (tool icon next to it). On the front, there's only a DVD player and a USB port.
I have 1 question left: both CSs and SPs now have a new IP address, but they are still using the old domain name and the old DNS server IP. How can I change DNS and domain name settings on the CSs and SPs?
christopher_ime
6 Operator
•
1962 Posts
1361
0
Posted January 6th, 2012 23:00
Mellman,
It depends on the version of VNX OE that is running.
1) Older than 7.0.35.3/05.31.000.5.502, this requires engaging your service provider as you will not have visibility to an important step to manually fuse the file with the block components. This is noted in the following KB article:
emc269625: "Changing Control Station and SP IP addresses on 7.0.12.0 - 7.0.14.0 VNX Unified systems only"
2) If on the other hand you are running 7.0.35.3/05.31.000.5.502 or newer, you can use the steps as noted in the following KB article:
emc279637: "Changing Control Station and SP IP addresses on 7.0.35.3 VNX Unified systems"