HEAT1

updated

13 years ago

H

HEAT1

22 Posts

0

1195

September 30th, 2013 08:00

VNX - Multiple CEPA pools

Can we configure multiple CEPA pools in a cepp.conf? 

IHAC who would like to add Symantec DLP into the CEPA environment which is currently configured with NTP quota management.

  • HEAT1

    22 Posts

    726

    0

    Posted September 30th, 2013 08:00

    Only one CEPA pool can be defined in the cepp.conf.

    As of Sept., 2013 there is no plan to support multiple CEPA pools.

    See below from "Using Event Enabler" documentation.

    cepa.png

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    726

    0

    Posted October 1st, 2013 03:00

    Actually it depends if you are doing pre- or post-events

  • HEAT1

    22 Posts

    726

    0

    Posted October 1st, 2013 20:00

    Hi Rainer,

    Could you explain how we can configure cepa for multiple pools?

    We can define pre- and/or post-events on a pool but we cannot configure multiple pools in the cepp.conf.

    Thanks,

    Masa

  • reverpie

    1 Message

    726

    0

    Posted September 21st, 2017 23:00

    Hello everybody,

    I am refreshing this post with new info and a question.

    It seems to me that now multiple pools are supported, according to 'docu48055' as April 2017

    https://www.emc.com/collateral/TechnicalDocument/docu48055.pdf

    Now CEE is able to support multiple pools (page 12)

    CEE_multiple_pools.PNG.png

    My question is now related to the client part (i.e. server_cepp): do we need a minimum VNX firmware version in order to support mulitple pools in cepp.conf?

    Thanks in advance for your help

    /Pietro