UNSOLVED

sohail mahmood

updated

13 years ago

0

5581

July 3rd, 2013 15:00

VNX 5300 SPB is not accessable

hi

i see the warning message on SPA event logs , that SPB is not accessable ,

i can ping the ip of SPB but not able to access it through HTTP.

need urgent help...

BR

sohail

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    658

    0

    Posted July 3rd, 2013 18:00

    is it logged-in to the switch ?

  • Vipin VK

    2 Intern

    •

    812 Posts

    658

    0

    Posted July 4th, 2013 04:00

    Ensure the paths are available from SP-B (check the paths status in powerpath from host side or login status in switch).

    If it is available this can be network/service issue,

    Confirm there is no IP conflict in the network (ping result is from SP-B only - it can happen that the IP is assigned to some other device and the result is from that device).

    Next step you can try opening /setup page, and if it opens try restarting management server.

    Support will help you to check the SP status (if it is hung or not) in case if you are not able to isolate the issue. You may register an SR with support for this.

  • cris_danci

    39 Posts

    658

    0

    Posted July 4th, 2013 04:00

    Can you access the setup page http://IP-Addressof-SPB/setup ?

    If you can try to restart the management server (NOT the SP).

  • RichRankin

    1 Message

    658

    0

    Posted July 5th, 2013 10:00

    Started seeing the same message.  I have an open call.  all though connection cannot be made, the I/O is not impacted (at least that is the message with me).

    Support is looking at rebooting the CS to see if that clears the issue.  One of my partner vendors says there may be an issue with the firmware version.

    I will follow-up when I have more.