sith555

updated

11 years ago

S

sith555

1 Message

0

627

August 10th, 2015 06:00

SMI-S on vVNX

Hi,

I have a problem to authenticate with the SMI-S on vVNX. I'm using TestSmiProvider to test the connection, but I always get - 401  Authorization Required. I tried the default credential and unisphere configured accounts, but none of them works. I tried to access "ecomconfig" via web, but it timed out.

Is there a documentation available, how to configure SMI-S on vVNX?

  • DaveSciuto

    106 Posts

    391

    0

    Posted August 11th, 2015 07:00

    Hello, sith555,

      Thanks for asking your question in the vVNX community.  You'll find the vVNX document that describes how to configure SMI-S here:  https://support.emc.com/docu52689_VNXe-Series-SMI-S-Provider-Programmer's-Guide-for-VNXe.pdf

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    391

    0

    Posted August 12th, 2015 10:00

    The vVNX and the VNXe series use a different technical base for the SMI-S provider than the SMI-S block provider on VNX and Solutions Enabler

    TestSMIprovider was written for the SMI-S block provider for the VNX series and wont work on the VNXe based implementation