Hi Everyone I have a VNX 5300 that is unified and has no data on it. I am interested in resetting this array back to a block only array...I don't have any need for the CS or the DM. Can anyone share the procedure on how to do this with me. I would assume you would just power up the SP's in the DPE and then run a re-image procedure. this would then allow you to configure it as block only and add DAE's.
zzz_t_the_ducky
1 Rookie
•
56 Posts
1759
0
Posted June 9th, 2016 17:00
You can get the procedure by procedure generator.
I recommend you do all update by CS.
After do that, try Back-Rev with latest OE.
Good luck!