UNSOLVED

dkmortensen

updated

12 years ago

D

dkmortensen

1 Rookie

•

21 Posts

0

17185

August 30th, 2014 22:00

Venue 11 Pro vPro - Hold power button for 2 seconds to turn on/wake?

I have to press and hold the power button of my Venue 11 Pro for 2 seconds to get it to power on. I believe this is also the correct method as per Dell's product manual. Can others confirm this is the same experience for them? I really don't like having to hold it down for 2 seconds. It feels awkward to hold a power button down this long. My Venue 8 Pro just needs a short tap of the power button to turn it on. Same with most other tablets & phones. Same with pretty much every PC & server I've ever used. Why does the Venue 11 Pro require us to hold the button down for 2 seconds? Is there a way to change/shorten this to only 1 second, or even just a short tap? Does this bother anyone else?
  • cscott32

    37 Posts

    664

    0

    Posted August 31st, 2014 01:00

    I have the v11 i3 and it's the same for me. At times I hold it so long I don't think it will turn on. Very odd though.
  • dkmortensen

    1 Rookie

    •

    21 Posts

    664

    1

    Posted September 1st, 2014 21:00

    @cscott32 - I have the same experience. 2 seconds really isn't consistent even though the manual says 2 seconds. I'd say it almost always fluctuates between 1-4 seconds. Quite annoying. Couple that with the fact that the vPro model can take several (2-8) seconds to go to sleep, or wake up from sleep. The result is sometimes I close the tablet to the keyboard in laptop mode, or I accidentally tap the power button on the side. So the tablet starts going to sleep. Often this happens when I actually do still need to use the tablet. In these cases it seems the power-button won't turn the tablet on (resume it from sleep) because it's not yet asleep yet. However, I have no way to tell for sure if it's asleep or dead or what. I can press the power button for 2-4 seconds and not even get a vibration. I never know what's happening in this situation because the screen is off. Sometimes I'll hold the button down for 5+ seconds, but this forces a hard power off (usually), which causes me to lose work, open files, etc. I have learned to be patient and wait an extra 5-10 seconds in these scenarios for the tablet to finish going to sleep. Then hold the button down for ~2 seconds until it vibrates. It's frustrating. Ultimately it causes delays & confusion. My former Windows 8 tablet was a Samsung Ativ SmartPC. It did a "Connected Standby" sleep, so was technically always on. Tapping the power button always quickly toggled the screen on or off. Much like you'd expect from any tablet or smart phone. I do think the Venue 11 Pro vPro is a good tablet, but I wish it would sleep much faster and wake much faster. This would be one more thing that would feel intuitive.