UNSOLVED

mark.christense

updated

18 years ago

0

6464

September 15th, 2008 21:00

OpenManage on my Dell PowerEdge servers. I dunno where to start

I took over a Systems Admin position for a company. The previous admin didnt install the OpenManage software on any of these servers. (servers range from PE1425C, PE1600SC, PE1430SC, PE1650, PE750, PE860, PE2850, PE6850, PE1950)

 

I spent some time online and dont know which tools to download or which is the best method of getting the OM tools on these servers.

 

is there a easy way, such as installing some management console on a pc and then searching the network and deploying the proper tools/utils to each server?

 

any help would be helpful.

 

thanks

 

Mark

  • maxwcc

    1 Rookie

    •

    5 Posts

    424

    0

    Posted September 16th, 2008 01:00

    Hey Mark,

     

    I am not by any means someone expert on OM. I will just tell you how I got it to work in a nutshell. There are basically two OpenManage Tools I use: Server Administrator and IT assistant.

    To download and install Server Administrator just go to support.dell.com->Drivers & Downloads->Systems Management->Open Manage Server Administrator Managed Node.

    For IT assistant  support.dell.com->Drivers & Downloads->Systems Management->Management Station.

     

    You may want to install Server Administrator on all systems. And then choose one of your systems to be the management station by installing IT assistant.

     

    You may want to check the following links for documentation:

     

    http://www.delltechcenter.com/page/OpenManage+Systems+Management?t=anon

     

    http://www.dell.com/content/topics/global.aspx/sitelets/solutions/management/openmanage?c=us&cs=04&l=en&s=bsd&redirect=1

     

    http://support.dell.com/support/edocs/software/svradmin/

    http://support.dell.com/support/edocs/software/smitasst/

    http://support.dell.com/support/edocs/software/smdrac3/

     

    HTH,

     

    Max

  • 424

    0

    Posted September 19th, 2008 09:00

    I was going to ask the same questions as the one in this thread.

     

     

    So I ma clear:-

    a. On each sever install the Server Adminsitrator

    b. On one machine - presumable my Vista workstation - install the It assistnent

     

    Is that the typical setup?

  • DELL-Jeff M

    2 Intern

    •

    793 Posts

    424

    0

    Posted September 21st, 2008 21:00

    That will work as long as the Vista system is not 64-bit and you are monitoring less than 10 servers.

     

    Look at http://support.dell.com/enterprise_videos for some instructional videos on setting up OMSA and ITA.