UNSOLVED

bobdoss

updated

15 years ago

B

bobdoss

2 Posts

0

78826

May 31st, 2011 09:00

Newbie questions about the iDRAC

Please forgive the newbie questions – I’d never heard of an iDRAC before my current contract.

For now, I just want to be able to reboot my SBS 2011 server remotely when Windows is hung.

When Windows is working, I can access the server via Remote Web Access, by navigating to the DNS domain name. The router is configured to forward all https traffic to the server’s internal IP address, over a single Ethernet cable from the router to NIC 2.

MY QUESTIONS:

  1. Since I have only a single DNS domain name, how do I specify (from the remote management station) that I want to talk to the iDRAC instead of the SBS 2011 server? (I assume by specifying a port number in the URL, and configuring the router to forward that port to the internal IP that I assign to the iDRAC??)
  2. Am I correct that sharing a NIC between the server and the iDRAC means that I only need a single Ethernet cable between the router and the shared NIC, i.e. I don’t need to connect the other NIC to the router at all?
  3. Can I use NIC 2 for this shared purpose, or must it be NIC 1? (I used NIC 2 for access to the server because NIC 1 didn’t seem to work properly)

And my most important question: Where can I find the “iDRAC for Dummies” documentation? I’d always rather research my own questions than reveal my ignorance on a forum like this (:>). I searched extensively, but all of the Dell documentation seems to assume a basic level of knowledge, like where to plug in the cables.  

  • bobdoss

    2 Posts

    10527

    0

    Posted May 31st, 2011 10:00

    It's a DRAC Express, so no dedicated Ethernet port.

    For now I only have one Ethernet cable available, so I think I'm forced to share the NIC?? Or would it be reasonable to split that single cable into two with a hub right at the server? The hub introduces it's own problems, but avoids sharing a NIC. Alternately, a shared NIC avoids the hub problems, but may create other problems I don't know about. Your thoughts?

    If I DO share a NIC, does it have to be NIC 1, or can it be NIC 2?

    After I assign an internal static IP to the DRAC (via CTRL+E), I know I can get to the DRAC or the Server independently  by specifying one internal IP address or the other in the browser.

    The question comes up when I access remotely. We only have one external IP, associated with one DNS domain name. To get to the server, I can use the DNS name by itself, because the router forwards all https traffic to the server's IP address. But I need a way to get to the DRAC's IP address from an external remote management station.

    Is it the best approach to forward a router port to the DRAC, and then access it remotely by specifing that port number along with the DNS domain?  

  • bradje99

    11 Posts

    10527

    0

    Posted June 9th, 2011 16:00

    Hi Bobdoss,

    We have a separate cable for the DRAC as it requires a separate IP (usually a completely different range from the Windows ip address). As for doco, sorry I can't be of assistance on that. I have tried to find it as well, but could not.

    Cheers,

    John Bradshaw