i would try re-activating the zone set on the switch, see if it will force the host to log back in into the FA, also try rescanning disk on the host itself.
rescanning for disks in the OS did not help ? (not sure what OS you are running). Can you get into HBAs utilities (SanSurfer or HBAnywhere) and run a rescan there or some kind of diagnostics. Also try PowerPath, on Windows run "powermt check force hba=all" or Unix/Linux try "powermt config". We just want to tickle the HBA to log back in.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
1085
0
Posted January 27th, 2010 03:00