With push you'll have the advantage of issuing incremental updates, but since you'll be doing a cold migration I don't know really. I guess it doesn't matter that much, but I'm not sure. I've always used hot push with OR.
I'm looking to see if I can find which is more efficient, but take a look at Primus solution emc231090. You will want to make sure that your SPC-2 flag is enabled on the V-Max
SPC-2 flag is not enabled on DMX-3 in our environment you think still do i have to enable it on VMAX.Is the migration from non SPC-2 hosts to SPC-2 enabled hosts is supported?
I can verify with the solutions author, but the one time that I have seen this issue it didn't make a difference if the SPC-2 flag was enabled on the DMX. You just need to make sure that is enabled on the V-Max.
Okay,but i think migrtion from non SPC-2 to SPC-2 enabled devices is not supported,Can you please double check with the author.One more question can this be a R1(SRDF/A) device.
As per me it is advisable to use cold pull as you might face some issues with the other. I was involved in part of implementation of cold pull but my architect suggested me to definitely go for cold pull. But do not remember the reason. Please double check too.
I have an e-mail out to the solutions author but I may not hear anything back until tomorrow as he is in a different time zone. And yes, the device can be an R1 device.
RRR
6 Operator
•
5739 Posts
646
0
Posted January 25th, 2010 23:00
With push you'll have the advantage of issuing incremental updates, but since you'll be doing a cold migration I don't know really. I guess it doesn't matter that much, but I'm not sure. I've always used hot push with OR.