UNSOLVED

natedogg26

updated

22 years ago

N

natedogg26

14 Posts

0

3813

February 4th, 2005 23:00

wont reconize new dvd-burner

recentley my old cd-rw quit working,  after trying everything i decided to get a new one and bought a
dvd-r/rw drive.  After installing i turned on and nothing.  Any idea why and how to get it to work.  Im running windows xp, dim 2200 the old burner was a NEC NR 7900A and the new one is a liteon 16x dvd-r/ rw drive ( double layer ).  any info would be greatly appreciated.
 
Thanks,
Natedogg26
 
  • Predator

    2 Intern

    •

    15286 Posts

    491

    0

    Posted February 4th, 2005 23:00




    Hi Natedogg,

    If the drive has a second device on the same IDE cable and factory installed bye Dell, how / what jumper setting did you use?
    Dell ships their systems using the Cable Select jumper Feature.

    Best Regards





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link

  • natedogg26

    14 Posts

    491

    0

    Posted February 4th, 2005 23:00

    I just hooked it up the same way the nec nr 7900 was connected. with the old one it reconized the drive but when i unhooked and hooked the new one up nothing.
  • Predator

    2 Intern

    •

    15286 Posts

    491

    0

    Posted February 5th, 2005 00:00




    Hi Natedogg,

    If I come across wrong, sorry not my intention....How many optical drives do you currently or did have with this system, will the new drive be the only drive on the Secondary IDE channel? If not, will it be in the top bay or middle bay?

    Best Regards





    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do and the eyesight to tell the
    difference.



    CD/RW Link

  • natedogg26

    14 Posts

    491

    0

    Posted February 5th, 2005 00:00

    I dont know much about pc's.  My old cd-rw quit working and i thought that i would buy a new one and since i had the money,  I would buy a burner that would burn cds and dvd's ,  the guy at the store said it works with xp and it would burn both so i bought,  I came home unpluged the pc,  disconnected the old burner and put the new one in and connected the same as the old one,  turned it on and nothing.  Under device manager , disk drives,  it shows MAXTOR 6lo20j1  and thats it.  With the old burner in it showed ( MAXTOR AND  NEC NR 7900A),  but with  the new burner its just got the MAXTOR.  I thought i could just buy a new burner connect and go,  but somethings not right.

    Thanks for helping

    natedogg

  • osprey4

    6 Operator

    •

    34230 Posts

    491

    0

    Posted February 5th, 2005 10:00

    Nate:

    Hopefully after a night of rest, you'll have the patience to go back and read Jeff's posts more carefully. He is asking you to check the following items:

    1. Do you have another CD-ROM drive?
    2. Did you set the jumper on the back of the new DVD burner to cable select (CS)?
    3. Which IDE connector did you use for the new drive, middle or end position?
    4. Another idea before you try booting into Windows (after you fix the items above). Boot into System Setup and try the Force IDE device redetect: turn on caps lock, scroll lock, & number lock.  Press ALT+E then ALT+F, save settings & exit.
  • natedogg26

    14 Posts

    491

    0

    Posted February 5th, 2005 19:00

    Hey guys,  Thanks for helping and,  sorry for misunderstanding.  No i dont have another CD-ROM drive,  the new dvd-burner drive is suppose to act as that too.  Its a LITEON SOHW- 1633S.  I did'nt mess with the jumper, just left everything like it was and,  I used the end of the IDE cable.  I took back to store today to see if their tech guy new what might be wrong.  Told him all my pc info and he said it should work.  He connected it to one of his pc's and it worked,  the only thing he could think of is that i had the jumper in the wrong position.  Should i try changing that or go ahead and try your next step?  Thanks again for all help guys.

     

    Natedogg26

  • osprey4

    6 Operator

    •

    34230 Posts

    491

    0

    Posted February 5th, 2005 21:00

    Natedogg:

    Yes, both Jeff and I are trying to tell you that you should change the jumper to cable select. So please change the jumper to cable select.

    Before you do anything, change the jumper to cable select. Then boot into the BIOS and follow my next suggestion.

    Please post back and let me know what happened. The first thing I'm going to ask you is, Did you change the jumper to cable select?