UNSOLVED

MysticSage

updated

19 years ago

0

2842

December 19th, 2007 19:00

Windows could not start due to a corrupted or a missing file

Hi folks I have a little problem with my laptop I have an Inspiron 500m Windows xp. At first it was working fine and then it froze then I turned it off and turned it back on. Now when turn it back on it says this message " Windows could not start due to a corrupted or a missing file \System32\Ntoskrnl.exe " I really don't know what that means and I was considering restoring it to factory settings but realize I have some important documents that I was working on before it froze. I been searching the web for a solution some say you need the windows xp cd but I don't have one and I was wondering if there are other methods in fixing this problem. I also have another problem with my laptop screen where the screen is cut in half meaning the top half of the screen works fine and the bottom half is all messed up. Ive been using a spare monitor that I have its not a big deal but annoying cuz Im confined to one spot while using my laptop. -Thanks for the help in advance
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    278

    0

    Posted December 19th, 2007 20:00

    Remove the hard drive, mount it into a 2.5" SATA drive case and attach it to a working system by USB. Then copy your data.

    Once you have a backup, run the Dell diagnostics (F12 at boot). If the drive fails, replace it. If it passes, you can either continue troubleshooting or restore the system. If you need the OS CD, see link below.

    The video issue is separate - does it show up on an external display? If so, it could be Windows corruption - or it could be a failing video card. If it doesn't show up on the external display, it's a faulty LCD panel.

    To order the XP CD,

    http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form?c=us&cs=19&l=en&s=dhs&redirect=1
  • jcn77056

    667 Posts

    278

    0

    Posted December 20th, 2007 01:00

    There's something called BartPE.  It's a way of creating a bootable Windows CD.  You can download the files here.  Follow the instructions and create a bootable CD.  You do need some part of the Windows distribution, I think it's the i386 directory.
     
    Once you have the CD, run it and copy the files to your USB pen drive, external drive, or over the network.
     
    Good luck.
  • 278

    0

    Posted December 20th, 2007 09:00

    go to recovery console and copy the file from \i386\ to c:\