UNSOLVED

dirgon

updated

22 years ago

D

dirgon

174 Posts

0

2386

March 5th, 2005 15:00

Unable to eject secondary hard drive

When I first got my Inspiron 8500, I upgraded the hard drive to the Hitachi 60 gig 7200 rpm drive and put the 40 gig that came in the machine into a drive bay which I use in the media bay of the laptop. Until recently, I have been able to choose the option to safely remove the hard drive so I could swap it out with a DVD burner when booted into Windows XP.

Over the past week or so, I have noticed that when I try to eject the secondary hard drive, I get a message from Windows that it is unable to eject the drive at this time. I have to shutdown the machine to remove the drive. When in Windows, I have tried shutting down all running software that I know about, but I still get the same message.

I can use the utility to safely remove my DVD burner with no problems, by the way.

Does anyone have any thoughts on this issue?
  • Bay Wolf

    4438 Posts

    240

    0

    Posted March 6th, 2005 19:00

    I suspect that something has changed in your Device manager for the modular hard drive.
     
    Try this:
     
    1. Go to your Device manager and then find under "Disk Drives" your modular hard drive.  Make sure that you first have it installed or it will not show up in the device manager.
    2. Double click on the drive to bring up the properties.
    3. click on the "Policies" tab.
    4. make sure that "Enable write caching on the disk" is NOT checked.
    5. Then make sure that "Optimized for quick removal" is selected and not "Optimized for performance"