Thanks for the reply, so it sees it as one large partition. Advantage to this is speed/performance, however your data is more at risk if HD fails, right?
Think will get WD Raptor as the primary HD and purchase a second SATA drive for storage. No Raid setup. That should work OK, shouldn't it?
You can partition a RAID 0 array, but your data is split over two drives - basically doubling your chances of data loss (if either drive fails, you lose everything).
Yes, a Raptor plus another SATA drive will work just fine.
ejn63
11 Legend
•
87469 Posts
•
321256 Points
97
0
Posted February 22nd, 2005 23:00