UNSOLVED

researcher

updated

23 years ago

R

researcher

48 Posts

0

3431

February 25th, 2004 14:00

NEC DVD+RW ND-1100A [CD-ROM drive

Several weeks ago I wrote about recording a DVD on this NEC drive and my LITEON DVD would not read the DVD. Both drives were installed by Dell. I finally got a utility that gave me information on both drives. The LITEON only reads DVD-R/DVD-RW while the Nec writes DVD+R/DVD+RW and reads everything. Why would Dell use this configuration? Wouldn't it be better to have the read only drive read the output from your read/write drive?
  • researcher

    48 Posts

    97

    0

    Posted February 25th, 2004 20:00

    Thanks for your reply. However, the Liteon does not read the DVD's R that I record on the NEC. The Toshiba DVD SD-C2502 on my Inspiron 8100 will read them. I did a check through a Nero utility and it reported that the Liteon would not read +.
  • DELL-Cody

    2 Intern

    •

    2166 Posts

    97

    0

    Posted February 25th, 2004 20:00

    According to the specifications of the Lite-On LTN-163 DVDROM drive, the drive can read DVD+RW media. DVD+R media may not have been widely available at the time of this drive's original design. However, if you have different media available, you may want to try reading that media in the Lite-On drive once it has been written with data.
  • 97

    0

    Posted February 26th, 2004 03:00

    I have the same problem...

    I think it's stupid to put noncompatible stuff in comp....Why do u do that dell.???

    I also asked this question to dell before , got the answer that i should be happy that the NEC read what it wrote ?????

    That's a lowmark for dell i think !

  • researcher

    48 Posts

    97

    0

    Posted February 26th, 2004 12:00

    Triggerready 
     That is exactly the first response I got from Dell. I always respected Dell's reputation. I would assume they would coordinate their hardware.