MediaDirect REINSTALLATION PROBLEMS SOLVED (stopping on 10% and other)
I have a simple set of steps (not a million different steps to follow) that you can follow to get your MediaDirect installed on the Inspiron e1705/9400 or any other Inspiron for that matter that uses the newest version of MediaDirect.
When you are Installing Windows XP and partitioning your hard drive - YOU NEED TO LEAVE AT LEAST 1450MB UNPARTITIONED AND UNALLOCATED - NOT 1308MB LIKE THE INSTRUCTIONS TELL YOU.
Then when you finish installing Windows XP make sure you install all your drivers - especially the latest video drivers and the latest DELL QUICKSET - DELL QUICKSET <ADMIN NOTE: Broken link has been removed / replaced from this post by Dell> IS REQUIRED!
Then REINSTALL mediadirect with the Dell MediaDirect reinstallation CD - the CD does not come with all new DELL laptops - you will have to call tech support to have them send you the CD for free.
If you formatted your hard drive and deleted all the partitions on it, or installed a NEW HARD DRIVE you will need to REINSTALL mediadirect NOT repair it - DO NOT USE THE REPAIR METHOD if you need to reinstall it. - as this will totally mess up the Windows XP partition and cause you to have to reformat!
I am working with people at www.notebookforums.com to upload the 500+MB MEDIADIRECT REINSTALLTION CD on the internet for everyone to download so they will not have to order it from DELL.
If you need to repair the DELL MediaDirect (AND NOT REINSTALL IT!) then you can download the DELL MEDIADIRECT repair utility from DELL here:
<ADMIN NOTE: Broken link has been removed from this post by Dell>
You will need to repair the DELL MediaDirect if it stops functioning properly or fails to load - ONLY IF YOU HAVE LEFT YOUR ORIGINAL DELL HARD DRIVE ALONE by not messing with the partitions and not formatting the hard drive - OTHERWISE follow the reinstallation instructions below.
THE DELL MEDIADIRECT REPAIR & REINSTALL INSTRUCTIONS CAN BE FOUND FROM DELL HERE: <ADMIN NOTE: Broken link has been removed / replaced from this post by Dell>
GOOD NEWS: I just confirmed that MediaDirect will install with these instructions with 3 TOTAL partitions before the MEDIADIRECT INSTALL is run. So when you run the Windows XP setup you can create a MAXIMUM of 3 PARTITIONS. MAKE SURE YOU LEAVE THE 1450MB UNALLOCATED, UNPARTITIONED, AND UNTOUCHED!
SO THE FINAL STEPS TO FOLLOW ARE: 1. Install Windows XP by booting from the Windows XP CD/DVD - when XP installation is run, make any changes you want to your hard drive, delete all the partitions if you want. 2. CREATE a partition UP TO A MAXIMUM OF THREE TOTAL! - Subtract 1450MB from the TOTAL MB you have to work with on your hard drive. Then divide the partitions up how you want. IN THE END LEAVE 1450MB TOTAL unpartitioned! 3. Install Windows XP 4. Install All the drivers you need. THE ONLY 3 I INSTALLED FOR TESTING WAS - Intel Chipset, Video, and DELL QUICKSET APPLICATION. 5. Insert or run the DELL MEDIADIRECT REINSTALLATION PROGRAM and it should complete succesfully. NOTE: DO NOT USE THE MEDIADIRECT REPAIR UTILITY AT ALL DURING THIS PROCESS!!
I am also working on this issue with a senior Dell tech support rep.
I will keep everyone updated.
Hope this helps, Josh
To find more information and posts dealing with the DELL MediaDirect issues do an advanced search here at the DELL forums and over at www.notebookforums.comwith the word MEDIADIRECT or MEDIA DIRECT (togeather and sperate wording will produce different search results) or follow the links below:
The MEDIADIRECT REINSTALLATION SOFTWARE CD UPLOAD TO THE INTERNET is NOW AVAILABLE ONLINE for download, thanks to me and several other hard working people over @
www.notebookforums.com
DELL does not provide this for download on the internet nor the CD with your new computer - you must call your sales rep, customer service, or technical support to get this CD!! The only MEDIADIRECT download DELL offers is the MediaDirect REPAIR ONLY! TO GET DELL TO OFFER THIS FOR DOWNLOAD - START PRESSURING THEM!
I really appreciate this info as I have talked to 4 different techs about this. Same problem, stopped at 10%. The last one told me it was my fault since I reformatted the drive and he acted like I was doing something illegal, even though it was another tech that sent me the Cd's so I could do it. Even then I was promised the CD's by Saturday and of course they didn't show up unitl the following Monday. The issue was "escalated" and was promised a call from a supervisor within 48 hours. Never heard a thing.
The last tech also told me there is no need to create unpartitioned space for MediaDirect and walked me through reformatting without the unpartitioned space. After all this was done, he then said I would need to wait for a call back two days from now and for me not to install any drivers as they will walk me through it. He said this because I mentioned to him that my ATI 256 MB Video Card control panel was crashing, so he didn't think I knew what I was doing. Why was it crashing...because it requires the NET Framework, that is not included on any of the CD's or in Dell's downloads section. I knew that, he didn't. Are Dell's tech's not trained on the latest machines? These guys have wasted so much of my time, I don't know why I do business with them.
Why did I want to reformat? I bought a 120GB hard drive on my 1505 and the total capacity was only showing 106 MB. Even after doing a complete reformat it only shows as 110GB. I was told by one of the techs the actual size of the drive is 118GB and that it what I would get after reformatting. Bull hockey, it's a 110 GB hard drive and now it's a gig short.
I'm glad I checked the site, because I am sure Dell would be giving me more of a run around.
I tried following your formula to the t; however, I'm still experiencing the same problem. The media direct software still does not install properly, it stops at 10%. I have called their tech support several times and have installed XP several times over and updated all the drivers. Any suggestions?
I tried the deducting the 1550 number and MediaDirect installed fine, but when I looked at the drive info it was showing additional unparttioned space. After doing some playing around I came with an exact number, where MediaDirect installs and there is no addtional unpartitioned space. That number is 1404 MB, at least on my system. My computer is up and running the way it should be. MediaDirect installed and running with no additional junk on the hard drive.
The 10% mark on MediaDirect installation is where it formats the parttion it needs and will appear to hang at that point. You need to wait. If you get a copy file error then the partition is not big enough.
Well, I finally got my system up and running over the weekend. Apparently, there is a trick to this whole install. I found the information on the website, did a google search. At any rate, the trick is to format (clean install) your drive with only 1 partition first after subtracting 1.5GB (at least this is what I did) for Media Direct. After installing XP Media Center on your computer and it's up and running with all the updated drivers, install Dell MediaDirect Cd. Make sure you have the latest Dell QuickSet, it's a must! Anyway, once everything is up and running, you can add more partition by using the disk management tool.
Here are the steps that I followed. http://support.microsoft.com/?kbid=309000
How to use Disk Management
To start Disk Management:
1. Log on as administrator or as a member of the Administrators group.
2. Click Start, click Run, type compmgmt.msc, and then click OK.
3. In the console tree, click Disk Management. The Disk Management window appears. Your disks and volumes appear in a graphical view and list view. To customize how you view your disks and volumes in the upper and lower panes of the window, point to Top or Bottom on the View menu, and then click the view that you want to use.
How to create a new partition or a new logical drive
To create a new partition or logical drive on a basic disk:
1. In the Disk Management window, complete one of the following procedures, and then continue to step 2:
• To create a new partition, right-click unallocated space on the basic disk where you want to create the partition, and then click New Partition.
• To create a new logical drive in an extended partition, right-click free space on an extended partition where you want to create the logical drive, and then click New Logical Drive.
2. In the New Partition Wizard, click Next.
3. Click the type of partition that you want to create (either Primary partition, Extended partition, or Logical drive), and then click Next.
4. Specify the size of the partition in the Partition size in MB box, and then click Next.
5. Decide whether to manually assign a drive letter, let the system automatically enumerate the drive, or do not assign a drive letter to the new partition or logical drive, and then click Next.
6. Specify the formatting options you want to use by using one of the following procedures:
• If you do not want to format the partition, click Do not format this partition, and then click Next.
• If you want to format the partition, click Format this partition with the following settings, and then complete the following procedure in the Format dialog box:
a. Type a name for the volume in the Volume label box. This is an optional step.
b. Click the file system that you want to use in the File system box.
You can change the disk allocation unit size, and then specify whether to perform a quick format, or enable file and folder compression on NTFS volumes.
Click Next.
7. Confirm that the options that selected are correct, and then click Finish.
The new partition or logical drive is created and appears in the appropriate basic disk in the Disk Management window. If you chose to format the volume in step 6, the format process now starts.
What the OP should have said is that you should not have more than 3
Primary partitions. You can have a max of four primary partitions on a harddrive thus the max of three in the first post. If you have installed windows as described in the first post
to the letter and you get an error at 10% still about not being able to write files then you most likely have at least two partitions one of which is a
Extended partition that has the second, third, etc
Logical partitions encapsulated inside of it along with the unpartitioned space. The unpartitioned space used by Media Direct
must not be contained inside of an Extended partition in order to work. To remedy this do the following:
1. Right click
My Computer and select
Manage 2. Click
Disk Management in the left side of the window.
3. Determine which extended partition contains the unpartitioned 1450MB area.
4. Right click the logical partitions in that Extended partition and select
Delete Logical Drive. If you already put data on these drives back it up if you need to.
5. Repeat step 4 until their are no logical partitions within the Extended partition. Then
delete the extended partition that they were all contained in.
6. Right click the new unpartitioned space and
create the partitions you need. You can create a new partition that is 1450MB less than the total space left. You may make multiple partitions and even an extended one but
keep in mind that the unpartitioned 1450MB space must not be inside an extended partition and that you must have 3 or less Primary partitions.
7. Once you are done insert the reinstallation diskette and it should install fine.
Has anybody successfully installed this with more than 3 partitions? I have an XPS m1710 with 4 partitions (windows, linux (5gb), linux swap (1gb) and boot(200mb)). I've already had to reinstall windows twice because of bad Mediadirect installation instructions I found on other forums and don't really want to mess it up again. I've read the steps to take above, but it said that itI still have 1.5Gb of free space at the end of my drive reserved for Mediadirect and burned the install image that i got from notebookforums. I'd like to get this working, but chickened out on the install with my finger above the Enter button. Any advice would be appreciated.
Thank you so much raystyle. I just received my XPS M1210 and afer formatting the drive and setting up my own partitions, I was worried I may have lost the MediaDirect feature completely. I followed your instructions and everything then installed like it should. Thanks once again.
i8000_coastal
2 Intern
•
229 Posts
525
0
Posted April 6th, 2006 10:00
Message Edited by i8000_coastal on 04-06-2006 08:02 AM