I have a vostro 3500 and I could not add a new ssd driver replacing my dvd optical driver because my bios does not recognize it everytime I reboot the system. Does anyone know how to solve it?
Here is a link to the Vostro 3500 product support pages. You can take a look at the user manual for your laptop to see how to install a new hard drive. The Vostro 3500 had the option at point of sale so you shouldn't have a major issue putting one in.
When you do insert a new hard drive in the system please make sure you follow all the safety provisions and the "before you work on your system" warnings in the user manual. You do have to open the access panel to reach the hard drive. The user manual will have full directions.
Let me know if you have any other questions and I'll help if I can.
The ssd option if available needs to be ordered when buying the laptop. The manual only shows how to replace the hard drive. I doubt that this 5 year model had the option. Dell recycles model numbers now and has a new line of vostro 3000 series that is not related to the old vostro 3500.
Very difficult if not impossible to install a ssd in the dvd bay of a 3500. Research it.
I already made a huge research on the internet to figure out how to solve my problem. I did exaclty the same thing described in the link you shared with me however I think the issue is about my kingston v300 sdd drive. For example, you can noticed the guy is using a samsung sdd, not kingston one in this article.
Anyway, everytime I reboot my computer the bios loses the sdd mapping on it. The curious part is, when I just turn off/on the computer, it shows up there in the bios again. If you have any idea about how to solve it, please let me know.
DELL-Todd S
4 Apprentice
•
1837 Posts
792
0
Posted April 14th, 2015 09:00
Hi Carlos,
Here is a link to the Vostro 3500 product support pages. You can take a look at the user manual for your laptop to see how to install a new hard drive. The Vostro 3500 had the option at point of sale so you shouldn't have a major issue putting one in.
When you do insert a new hard drive in the system please make sure you follow all the safety provisions and the "before you work on your system" warnings in the user manual. You do have to open the access panel to reach the hard drive. The user manual will have full directions.
Let me know if you have any other questions and I'll help if I can.
Todd