Installing a second hard drive with a pre-existing primay and zip drive
I have a Dell Dimension 8200. I purchased a second hard drive for storage purposes. I looked at the documentation and assumed it would be a slam dunk. However, my IDE drive is currently attached to the zip drive that was installed with my system and my primary drive. How can I install my second hard drive and still keep my zip drive working? Would I need to purchase an additional IDE cable specifically for the zip drive? And if so, where would I attach it to the board? Would I also need to change the jumpers on the back of the zip drive?
If you have a single optical (CD, DVD) drive, you can attach the new hard drive to it as a slave. However, you will likely find you need to buy a 5.25" adapter bracket so the cable will reach both drives.
If you have two CD/DVD drives, you will need to buy a PCI EIDE controller card to run the additional hard drive, or disconnect one of the EIDE devices (ZIP or one of the CD drives).
Thank you for the info. I received the same reply from a user of the forums. Unfortunately, I don't have a free slot for a PCI EIDE controller card, so my only option is to copy the files from my ZIP disks onto my hard drive and then disconnect it. This will allow me to then install the additional hard drive.
ejn63
11 Legend
•
87469 Posts
•
321256 Points
325
0
Posted December 29th, 2006 17:00
If you have two CD/DVD drives, you will need to buy a PCI EIDE controller card to run the additional hard drive, or disconnect one of the EIDE devices (ZIP or one of the CD drives).