UNSOLVED

thricipio

updated

19 years ago

T

thricipio

1 Rookie

•

35 Posts

0

1569

March 19th, 2008 05:00

Inspiron 8600 - Can't create partitions: [C: / D: / E:]

I've installed a new (Seagate Ultra ATA/100) 120 GB hard drive on which I'll do a fresh install of WinXP Home.  I'm trying to recreate the same partitioning scheme I had on my Inspiron 1000 (it, having bit the dust, so to speak), which was as follows:

C: - System

D: - Programs

E: - Files

 

When I step through the WinXP Setup routine (off the CD-ROM disk), and attempt to do the partitioning... well, I can create the partitions okay, but they come out as: [C: / E: / F:] ... no [D:] !!!

 

For reasons not worth going into, I'd sure like to get: [C: / D: / E:] instead.  But I don't know if  this can be done, much less, how to do it.

 

Any answers, feedback, etc., will be greatly appreciated.

 

Thanks in advance.

 

--Thri

  • Bluehaze

    12 Posts

    218

    0

    Posted March 19th, 2008 07:00

    You can always change the Drive letter except the c: drive in your administrative tools --> computer management---> disk management.

     

     

    So just intall XP home normally.. then when you log in for the first time you can change drive at the area i informed above.  More likely the D: drive is being saved for the CD rom. But that can be changed once you install xp home and do the above.  

  • thricipio

    1 Rookie

    •

    35 Posts

    218

    0

    Posted March 19th, 2008 13:00

    Thanks a bunch, Bluehaze.  That solves my little problem.  Actually, I'm somewhat familiar with Disk Management.  Funny thing is... I never realized you could change drive letters with it.  I guess I should have paid more attention to the the word "management!"

     

    Anyway, I still find it a bit odd that the partitioning routine would skip D: ... but... whatever.

     

    Thanks again for the help.

     

    --Thri

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    218

    0

    Posted March 19th, 2008 15:00

    D: is usually used by the CD/DVD drive when the OS is installed.

     

  • thricipio

    1 Rookie

    •

    35 Posts

    218

    0

    Posted March 19th, 2008 21:00

    Well, that makes sense enough to me.  But, I guess the reason I was a bit surprised is that I went thru this exercise with my Inspiron 1000 when the original HDD bit the dusk after 15 months of usage.  When I put in the new HDD and reinstalled WinXP, I'm pretty sure it partitioned the drive with [c:/d:/e:].  So, I guess I just expected it to do the same thing with the I-8600.  I wonder if the difference could have something to do with the respective laptops' BIOS.    --Thri