UNSOLVED

REtaurus

updated

21 years ago

R

REtaurus

46 Posts

0

2733

September 4th, 2005 21:00

how to enable dma mode 5

I juss bought a dim 2400, its saying that the primary hard drive (western digital 80 GB) is running in ulta dma mode 2 and so are the dvd burners which are supposed to be in dma mode 5. However, dma mode 2 gives me a slow burn speed (12 mins as compared to 6 min on my other comp which is a dim L500cx that is running in dma mode 4) this is crazy, my 7 yr old dell is running in dma mode 4 but my new 2400 is running in dma mode 2. i tried uninstalling reinstalling chipset and hard drive, enabling it disabling it, etc in bios. no change. I have 1 hard drive mind you. should my 2400 hard drive be running utra dma mode 2? i also tried updating chipset drivers, nothing. According to intel accelerater software, my chipset is capable of ultra dma mode 5 and my hard drive is also capable of dma mode 5  please help....
  • osprey4

    6 Operator

    •

    34230 Posts

    110

    0

    Posted September 5th, 2005 11:00

    Your hard drive should be running in UDMA 5 and your DVD drives in UDMA 2 or 4 (depending on the model). Check your cables first. Open the case and pull out and re-seat each connector, including the ones at the motherboard. After you do that, boot to system setup (F2 at the blue Dell logo) and make sure all three devices are turned on.

    Windows will automatically step the hard drive down if it encounters errors, so it's possible your hard drive is defective.

    Message Edited by osprey4 on 09-05-2005 08:03 AM