UNSOLVED

fatcat88

updated

18 years ago

F

fatcat88

4 Posts

0

10480

October 6th, 2008 01:00

Ahci/sata question on Precission 380

I have a 2 years old Precession 380. It's a Dual core p4 d 3.6 AND HAS 2 sATA hd. One 80 Ga for system and one 250 Ga for storage. I'm running under Windows Xp Pro for 2 years without any problem. I have a new task needs to use Chinese Version of Windows Xp Pro. I put in the Chinese WinXp CD but fail to find my HD. I found the solution on the FAQ to change the Autodetect/Sata to Autodetect/ATA and everything went OK. I install the new version of WinXp Pro and format the 250 Ga HD without any problem. I went to Dell support to DL all the drivers and install it. Only the intel Matrix Storage manager driver refuse to install said this is not for this computer (but it's listed under SATA Drivers). I went to the Bios and try to change the setting to Autodect/SATA like before but the computer won't boot. I have a few questions, Please help!

 

1. Is my computer's HD running at IDE mode?

2. Do I need to change the setting back to Autodetect/SATA? And how?

3. If I don't change. Does it affect the performance of the computer?

4. Do I need to install the SATA driver in order to correct this and how?

Thank you!

  • FastBoot

    20 Posts

    436

    0

    Posted October 6th, 2008 12:00

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=LATITUDE%20PRECISION%20380&os=WW1&osl=en&catid=&impid= <-- download the driver but reset first the settings you've done on the bios. (the sata operation)
  • fatcat88

    4 Posts

    436

    0

    Posted October 6th, 2008 21:00

    I did DL the driver but my computer refuse to let me install the driver. But when I reset the bios to the original setting (autodetect/SATA). My computer won't boot. Thank you for your reply anyway.
  • mombodog

    2 Intern

    •

    12735 Posts

    436

    0

    Posted October 7th, 2008 00:00


    1. Is my computer's HD running at IDE mode?

    2. Do I need to change the setting back to Autodetect/SATA? And how?

    3. If I don't change. Does it affect the performance of the computer?

    4. Do I need to install the SATA driver in order to correct this and how?


     

    1. Yes

     

    2. No, but if you do you will have to re-install XP and use F6 at the beginning of setup to load the sata driver.

     

    3. No, the only thing AHCI does is enable NCQ (if your hard drive supports it) and hot swapping of hard drives (maybe) depends on the bios also, Most Dell desktop bio's do not support hot swap regardless of AHCI.

     

    4. No

     

     

    I suggest to leave it as is and there is no need to install the Sata driver, skip it and start using the PC.

     

     

  • fatcat88

    4 Posts

    436

    0

    Posted October 7th, 2008 01:00

    Thank you for the reply. I think I just leave as is for now because I don't want to reinstall windowsXp again. One last question. Is SATA has better than IDE?
  • FastBoot

    20 Posts

    436

    0

    Posted October 7th, 2008 05:00

    Oh ok. Just use the Ahci settings. by the way can you use the combo settings?

     

  • FastBoot

    20 Posts

    436

    0

    Posted October 7th, 2008 05:00

    yes. It's the new architecture for all computers. :) It's more faster for data transmission .
  • shesagordie

    12 Elder

    •

    46017 Posts

    436

    0

    Posted October 7th, 2008 19:00

    fatcat88

    You will not see any difference in speed between, 7200rpm, SATA and PATA [IDE] hard drives.

    Reading the post here may give you more information on the subject.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
    Message Edited by shesagordie on 10-07-2008 03:07 PM
  • fatcat88

    4 Posts

    436

    0

    Posted October 19th, 2008 01:00

    Thank you for the reply! I just leave it as is now and running without any problem. I didn't notice any speed different from before.