Hello, I currently have been tasked from a customer to use (2) win2k3 servers, AutoStart with only 2 network cards in each server. 1 for corp. network traffic and the other for the mirror data via cross over cable?
According to the documentation, it states that 2 nics are the minimal requirements and the customer only wants that, they don't want to add 3rd nic to each server?
I currently configured and tested that 2 nic solution does indeed work, but everytime I simulate a hard ware failure, be it a nic failure, switch failure or complete server failure the standby server picks up like it's suppose to be, but when the primary (original server) comes back online, the mirror set is broken and has to be resych'd. NO matter what I do with the verification/Domain configuration, I can not get around this.
Am I misconfiguring the system? Limitation in EMC w/ only 2 nics? Can someone answer this question or help point me in the right direction so that I can inform the customer why they want 3 nics verses 2 nics.. and/or why the documentation states 2 is min....?
so under the isolation script I should enter the corp IP address'? So that they can not ping/see each other? The cross over cable's are using no routeable address's such as 10.x.x.x or 172.x.x.x or 192.x.x.x. What ever range is not being used at there site? Is the isolation script the only step that I am missing? Do I need to modify the script? I am going to do some testing here shortly and see what I destroy ?
Is there any other advantages having 3 nics in each server beside network redundancy? Will the 2 nic solution work as designed without breaking the mirror set?
thanks for your help/comments and explainations... I am going to finish up a build in my test lab and destroy some stuff...
Is it just me or does EMC seem to have a hard time answering these questions.. I placed a call and seems like sales always wants to talk to me.. THEN they never call me back..
sorry for venting... BUT You've answered more of my questions than support line has..
still manage to break the mirror set with only 2 nics.. just seems like there is a limitation with that....
I have Isolation script configured, and when I remove the Network cable from server1 that is running the resource group (application via service, and the data store). The server reboots (isolation) but the second server never picks up, the console, all icons' go to yellow status.. but never come on line?
yito1
262 Posts
346
0
Posted June 9th, 2008 18:00
It is necessary to use the Isolation function at 2NIC composition.
Because it falls into the split brain.
In the split brain, mirror status becomes BROKEN and must do a re-mirror
Yoshinobu