UNSOLVED

ElectromekDiagn

updated

18 years ago

E

ElectromekDiagn

2 Intern

•

35 Posts

0

6521

December 23rd, 2008 15:00

Dell Rack front airflow side sealant panels

Hello,

 

I'm looking for a part number for the panels that seal the space between the front bracket and the main rack bracket.  We have 2 racks, both Dell, and one came with them, one came without them.   

 

This is the rack without them.  There is a space between the front door of the rack and the side space, which is causing hot air to vent out directly in front of the servers, so naturally that hot air is being pulled into the chassis.

 

This is the rack that came with them.  These panels prevent air from flowing from the back and side of the rack to the front.  This is what I need.

 

  • 1141

    0

    Posted January 5th, 2009 10:00

    Are both of those Dell Racks?

  • ElectromekDiagn

    2 Intern

    •

    35 Posts

    1141

    0

    Posted January 5th, 2009 11:00

    Yes, these are both dell racks.

     

  • ElectromekDiagn

    2 Intern

    •

    35 Posts

    1141

    0

    Posted January 9th, 2009 09:00

    Does anyone have any idea?   I would think Dell would at least know their own part numbers.  Even our sales guy is clueless.

     

    Wonderful.  I bet HP would know their own rack.

     

  • ElectromekDiagn

    2 Intern

    •

    35 Posts

    1141

    0

    Posted January 10th, 2009 09:00

    No.  That is a rail kit  for a Poweredge 850.  Nice try though.

     

     

    It's awesome that the closest thing someone has to an answer for me is check Ebay. 

     

    Dell-  What is the point of setting up Dell forums when Dell staff doesn't even respond to customer questions?   I'm really, really frustrated with Dell at this point.  My sales person has no answers.  He referred to the rack group, they have no answers.  I tried the forums- 0 response from Dell.

     

    Do you not even know your own product?  We do close to 1/4 million in sales with Dell, yet when I really need something they come up blank.   Just more of a case to move to HP as our supporting vendor did.  Total frustration here.... all over a $2 piece of metal.

     

     

     

  • 1141

    0

    Posted January 12th, 2009 08:00

    I have not been able to even find this side panel listed anywhere.  I have even called Rittal, the manufacturer's of the rack.  There are a few alternatives that you may want to consider.  The first one one is to use some black packing foam and seal the sides off yourself.  You won't even be able to see the foam if you place it back a little.  This option will coast you less than $10.  The second option is to have the piece made at a sheet metal shop.  We can do it but it will be more than $10, alot more.  Dell, HP, and IBM don't make Racks, they just rebrand somebody's elses Rack.  So going to a different Server Manufacturer because you don't like their Rack Support is not going to improve your situation.  We support all of them and believe me it's not going to get any better.