I have a problem creating a factory recovery media to a usb flash drive on the newer version of dell back up and recovery it gives you three options usb hard drive usb flash drive or a disk i used the usb flash drive option i inserted the flash drive into my laptop and it says please attach a usb flash drive which i have inserted into the usb port but when i click in the usb hard drive option i see space i have on my hard drive which is not inserted into a usb port
Thank you for writing to the Dell Community forum.
The USB flash drive needs to be formatted and should be of 8GB size.
Currently factory backups are only supported on certain Windows 8 certified USB flash drives. The program will not detect the drive in case the flash drive is recognized by the system as a fixed disk. Try a different USB flash drive if this happens.
It is recommended to use a USB flash drive, since the size of the factory back up is around 7GB. If you are using DVD option, you would need two non-re-writable DVD's to create back up disk. The process remains the same as mentioned in the link above.
there is something i forgot to mention the usb drive that i tried to do a system backup to is the same one i did a back up to before i put the laptop back to factory settings last year i was wondering if i can use the system recovery option that i created last year would be ok to use the now, the reason i ask this question is in case the laptop goes back to the problems i had before i put the laptop back to factory settings
the flash drive in question still has 10 gb of space remaining
Get a 16 Gig or Larger USB flash drive that has Windows 8 Ready boost certification. Then use USB 2.0 not USB 3.0 ports if your machine has both types. The USB 3 ports will be blue. Also do an update to DBAR if it shows that one is available. Typical backup is over 10 gigs.
DELL-Prajwal Sh
2 Intern
•
395 Posts
367
0
Posted July 4th, 2015 04:00
Hi,
Thank you for writing to the Dell Community forum.
The USB flash drive needs to be formatted and should be of 8GB size.
Currently factory backups are only supported on certain Windows 8 certified USB flash drives. The program will not detect the drive in case the flash drive is recognized by the system as a fixed disk. Try a different USB flash drive if this happens.
For more info, please check the link below:
http://www.dell.com/support/article/us/en/04/SLN151701/EN#Factory