UNSOLVED

Tokend24

updated

20 years ago

T

Tokend24

12 Posts

0

12059

July 12th, 2006 01:00

CD-RW & DVD+RW confuse Precision 690

I just got a brand new Precision 690, with a DVD-ROM drive and a DVD+-RW drive. Lovely machine.

The RW drive shows as "HL-DT-ST DVD+-RW GWA4164B" in Device Manager. DM also shows "This device is working properly."

I am able to read and write CD-Rs. I haven't tried burning DVD-Rs yet. I am able to play DVD movies. Also, I am able to read DVD+RWs written on another computer, though I am not able to write new files to the media on the 690. The free space on DVD+RWs written on another computer shows as "Non-Allocatable Space" in Explorer.

When I insert a blank DVD+RW or a blank CD-RW, a Windows box pops up and gives me the option to format the media using Roxio DLA. However, when I take this option, the so-called formatting is over in a couple of seconds, and no formatting occurs. The device changes to a "CD Drive" by Device Manager, Explorer, etc.

Any help or suggestions would be appreciated.

Thanks,

Ken
  • Dilbatt

    191 Posts

    337

    0

    Posted July 12th, 2006 12:00

    Try unchecking the Sonic DLA checkbox and re-checking.  I know this sounds silly, but give it a shot.
     
    Also, what operating systems is this?  XP32 or XP64?
  • Tokend24

    12 Posts

    337

    0

    Posted July 12th, 2006 14:00

    Dilbatt,

    It's XP32.

    Thanks for the suggestion.

    I'm not sure what you mean by "the Sonic DLA checkbox." If you mean the "Windows can perform the same action..." box that pops up when I insert a blank DVD+RW, there is no checkbox. I tried deselecting and then reselecting "Format using Roxio DLA," to no avail.

    When I insert a blank RW disc, the drive type in Explorer changes to "CD Drive." There is no "format" option on right-click. When I eject the disc, the type changes back to "DVD-RW."
  • Tokend24

    12 Posts

    337

    0

    Posted July 12th, 2006 17:00

    Oh, gotcha.

    That might have worked, given the following: I uninstalled and reinstalled the Roxio & Sonic software from the reinstall disc. This time, the "Format using Roxio DLA" worked as it should on a DVD+RW. Once formatted, drag & drop work fine. I just backed up ~4GB to a single-layer DVD+RW successfully.

    One weird thing remains: When I insert and format a DVD+RW, Explorer still shows "CD Drive (E:)" IN ADDITION TO DVD "volumeName (E:)" Two drive E:s? Right-clicking either E: drive now shows a format option.

    So, maybe your suggestion of disabling/enabling Roxio might have been the slap in the face that it needed.

    Thanks for taking the time to help.
  • Tokend24

    12 Posts

    337

    0

    Posted July 12th, 2006 17:00

    Dell's forum software translates E-colon-right paren as happy face. I'm not grinning midmessage for no reason, except for now... :)
  • Dilbatt

    191 Posts

    337

    0

    Posted July 12th, 2006 17:00

    So, if you go My Computer and right click on the DVD drive, and then select Properties from the menu, you should see a DLA tab.  On this tab, there should be an entry that states "Enable DLA on your drives". 
  • 337

    0

    Posted September 5th, 2006 22:00

    I have found the DVD software less than perfect. There is an alarming messages about formatting and the results not been comptable with other people.
     
    My impression  is that the software is producing unneccessary prompts and I have sent DVD to other people who can easily read read the DVDs.
     
    I have loaded "Nero" Cd/DVD software and this works fine on the precision. This is software I have been supplied with a number of products. However the version I have is not compatable with the dell version of 32 bit XP. Upgrading nero sorts this our and there is no charge.